LED-Heart
grigoredy-gif·LED-Heart
About the LED-Heart PCB
LED-Heart is an open source STM32 PCB design by grigoredy-gif, published on GitHub under the MIT license. It is a 2-layer board measuring 85 × 50 mm, with 111 components from 9 distinct parts.
Its main chip is the STM8S003F3P6TR, from the STM32 family. Other key parts include the 74HC595D. By type, the board carries 72 LEDs, 19 resistors, 8 transistors, 5 switches, 4 capacitors and 2 ICs.
It belongs with the displays & leds designs in this gallery.
From the project
A 9 x 8 matrix of 72 red LEDs on an 85 x 50 mm board, driven by an STM8S003 microcontroller and a 74HC595 shift register. It shows a beating heart, animations and scrolling text, and runs from three AA or AAA cells. Five buttons choose the mode, the speed and the brightness, and
A 9 x 8 matrix of 72 red LEDs on an 85 x 50 mm board, driven by an STM8S003 microcontroller and a 74HC595 shift register. It shows a beating heart, animations and scrolling text, and runs from three AA or AAA cells. Five buttons choose the mode, the speed and the brightness, and switch it on and off.
The renders show the black solder mask the boards were ordered with. KiCad has no 3D model of the buttons, so the renders use a look-alike of about the same size.

Main components on the LED-Heart
LED-Heart bill of materials (BOM)
111 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM8S003F3P6TR | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | 74HC595D | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 8 | S8050 | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 5 | TS-1187A | SW_TS-1187A | SW1, SW2, SW3, SW4, SW5 |
| 72 | C2286 red | LED_0603_1608Metric | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +64 |
| 1 | SS14 | D_SMA | D1 |
| 4 | 1u | C_0603_1608Metric | C1, C2, C3, C4 |
| 9 | 270 | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 10 | 1k | R_0603_1608Metric | R10, R11, R12, R13, R14, R15, R16, R17 +2 |
LED-Heart design files
The KiCad project lives in the grigoredy-gif/LED-Heart repository on GitHub; these links point at the commit this page was built from.
- Layoutled_heart.kicad_pcb
- Schematicled_heart.kicad_sch
- BOMfabrication/led_heart_jlc_bom.csv
LED-Heart: common questions
What microcontroller does the LED-Heart use?
The LED-Heart is built around the STM8S003F3P6TR, from the STM32 family.
How big is the LED-Heart PCB?
The LED-Heart measures 85 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LED-Heart?
111 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LED-Heart design files?
From the grigoredy-gif/LED-Heart repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LED-Heart design in my own project?
Yes, under the terms of its MIT license, which grigoredy-gif chose for the repository.
Can I test firmware for the LED-Heart without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k