Can4vscp kelvin ntc10k
grodansparadis·can4vscp-kelvin-ntc10k·kicad/kelvin_ntc_B.kicad_pcb
About the Can4vscp kelvin ntc10k PCB
Can4vscp kelvin ntc10k is an open source PIC PCB design by grodansparadis, published on GitHub under the CERN-OHL-1.2 license. It is a 6-layer board measuring 72 × 42.3 mm, with 49 components from 27 distinct parts.
Its main chip is the PIC18F2580, from the PIC family. Other key parts include the MCP2551SN and LM2575S. By type, the board carries 17 resistors, 14 capacitors, 4 connectors, 3 ICs, 3 diodes and 2 LEDs.
It belongs with the sensors, iot & wireless and test & measurement designs in this gallery.
From the project
CAN4VSCP Kelvin NTC temperature measurement module
This project is part of the VSCP (Very Simple Control Protocol) project.
This module is part of the VSCP project. It is free to use, modify and sell. The only thing we kindly ask is that improvements and extensions are contributed back to the project (at your will). This to make the project better for everyone. All design files is licensed under the MIT license.

Main components on the Can4vscp kelvin ntc10k
Can4vscp kelvin ntc10k bill of materials (BOM)
49 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC18F2580 | SO28 | IC1 |
| 1 | MCP2551SN | SO-08 | IC3 |
| 1 | LM2575S | TO263-5 | IC4 |
| 1 | 10 MHz | 9C | Q1 |
| 1 | OSTTE-12 | PINHEAD-12 | J1 |
| 1 | A00-108-220-450 | RJ-45 | J2 |
| 1 | — | MA06-1 | J3 |
| 1 | — | MA04-1 | J4 |
| 2 | — | 1,6_0,8 | PAD1, PAD2 |
| 1 | — | B3F-31XX | S1 |
| 1 | 10K | R0805 | THERMISTOR0 |
| 1 | — | CHIP-LED0805 | LED1 |
| 1 | Red LED | CHIP-LED0805 | LED2 |
| 2 | 1N5819 | SOD123 | D1, D3 |
| 1 | NUP2105L | SOT23 | D2 |
| 1 | 330 uH | DO3316P | L1 |
| 1 | 100uF | PANASONIC_D | C1 |
| 1 | 330uF | PANASONIC_D | C2 |
| 1 | 100nF | 0805 | C3 |
| 2 | 15pF | C0805 | C4, C6 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0.1uF | C0805 | C5, C7 |
| 6 | 10uF | C0805 | C8, C9, C10, C11, C12, C13 |
| 1 | 10 uF | C0805 | C14 |
| 8 | 10K | R0805 | R1, R2, R4, R5, R8, R10, R13, R15 |
| 2 | 1K | R0805 | R3, R11 |
| 6 | 330 | R0805 | R6, R7, R9, R12, R14, R16 |
| 1 | 120 | R0805 | R17 |
Can4vscp kelvin ntc10k design files
The KiCad project lives in the grodansparadis/can4vscp-kelvin-ntc10k repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/kelvin_ntc_B.kicad_pcb
- Schematickicad/kelvin_ntc_B.kicad_sch
Can4vscp kelvin ntc10k: common questions
What microcontroller does the Can4vscp kelvin ntc10k use?
The Can4vscp kelvin ntc10k is built around the PIC18F2580, from the PIC family.
How big is the Can4vscp kelvin ntc10k PCB?
The Can4vscp kelvin ntc10k measures 72 × 42.3 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Can4vscp kelvin ntc10k?
49 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Can4vscp kelvin ntc10k design files?
From the grodansparadis/can4vscp-kelvin-ntc10k repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Can4vscp kelvin ntc10k design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which grodansparadis chose for the repository.
Can I test firmware for the Can4vscp kelvin ntc10k without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379