Can4vscp vilnius

grodansparadis·can4vscp-vilnius·kicad/vilnius_rev_c.kicad_pcb

Can4vscp vilnius PCB layout, top view — open source PIC board by grodansparadis

About the Can4vscp vilnius PCB

Can4vscp vilnius is an open source PIC PCB design by grodansparadis, published on GitHub under the CERN-OHL-1.2 license. It is a 6-layer board measuring 72 × 42 mm, with 43 components from 26 distinct parts.

Its main chip is the PIC18F2580, from the PIC family. Other key parts include the MCP2551SN, LM2575S and MCP604. By type, the board carries 13 resistors, 8 capacitors, 6 diodes, 4 ICs, 4 connectors and 2 LEDs.

It belongs with the iot & wireless designs in this gallery.

From the project

Vilnius A/D module

This module is part of the VSCP project. It is free to use, modify and sell. The only thing we kindly ask is that improvements and extensions are contributed back to the project (at your will). This to make the project better for everyone. All design files is licensed under the MIT license.

Vilnius A/D module is a CAN4VSCP based module that have four 10-bit A/D channels for 0-5V or 0-10V and also have two 5V I/O channels that can be set as inputs or outputs. General use is to read analog values and as all other VSCP modules you can get the readings reported automatically with a user…

Can4vscp vilnius, from the project README
From the project README

Main components on the Can4vscp vilnius

Can4vscp vilnius bill of materials (BOM)

43 components, 26 distinct parts.

QtyPartRefs
1
PIC18F2580
IC1
1
MCP2551SN
IC3
1
LM2575S
IC4
1
MCP604
IC5
1
10 MHz
Q1
1
OSTTE-12
J1
1
A00-108-220-450
J2
1
—
J3
1
—
J4
2
—
PAD1, PAD2
1
—
S1
1
S1D
UNK1N5819
2
—
LED1, LED9
1
S1D
D1
1
NUP2105L
D2
4
BAT54
D3, D4, D5, D6
1
330 uH
L1
1
100uF
C1
1
330uF
C2
1
100nF
C3
Show 6 more
QtyPartRefs
2
15pF
C4, C6
2
0.1uF
C5, C7
1
10 uF
C8
10
10K
R2, R4, R100, R101, R102, R103, R104, R105 +2
2
1K
R3, R11
1
120
R17

Can4vscp vilnius design files

The KiCad project lives in the grodansparadis/can4vscp-vilnius repository on GitHub; these links point at the commit this page was built from.

Can4vscp vilnius: common questions

What microcontroller does the Can4vscp vilnius use?

The Can4vscp vilnius is built around the PIC18F2580, from the PIC family.

How big is the Can4vscp vilnius PCB?

The Can4vscp vilnius measures 72 × 42 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Can4vscp vilnius?

43 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Can4vscp vilnius design files?

From the grodansparadis/can4vscp-vilnius repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Can4vscp vilnius design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which grodansparadis chose for the repository.

Can I test firmware for the Can4vscp vilnius without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards