Tcg counter hardware

groundst8·tcg-counter-hardware·tcg_counter/tcg_counter.kicad_pcb

Tcg counter hardware PCB layout, top view — open source board by groundst8

About the Tcg counter hardware PCB

Tcg counter hardware is an open source PCB design by groundst8, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 63 × 88 mm, with 20 components from 15 distinct parts.

Other key parts include the TCAL9539RTW and RF430FRL152. By type, the board carries 12 capacitors, 3 resistors, 2 ICs, 1 connector and 1 inductor.

It belongs with the dev boards & breakouts and displays & leds designs in this gallery.

From the project

Schematics and PCB layout for TCG Counter

TI RF430FRL152H - ISO 15693 - NfcV - 1.5V passivey powered - 8 bit GPIO - I2c - +/- 400 uA GPIO current, 500 uA max all I/O 0.15V voltage drop

Ynvisible D0432G02V01 - 7 Segment E-Paper Display - +/- 1.5V operating voltage - 0.81 uA steady state current, all segments on - ~3.25 mA (datasheet says 2.92 mA) peak current all segments; ~1.25 mA peak / segment

TI TCAL9539 - Low-Voltage 16-Bit I2c Expander - I/Os backpowered protected

Tcg counter hardware, from the project README
From the project README

Main components on the Tcg counter hardware

TCAL9539RTWRF430FRL152

Tcg counter hardware bill of materials (BOM)

20 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TCAL9539RTW
U1
1
RF430FRL152
U2
1
TC2050-IDC-430
P1
1
~
DS1
1
Antenna
L1
4
100NF
100nF
C1, C3, C4, C5
1
2.2µF
C2
2
10NF
10nF
C6, C7
1
91PF
91pF
C8
1
1µF
C9
1
DNP
C10
1
1UF
1uF
C11
1
0.1UF
0.1uF
C12
1
0
R1
2
10K
10k
R2, R3

Tcg counter hardware design files

The KiCad project lives in the groundst8/tcg-counter-hardware repository on GitHub; these links point at the commit this page was built from.

Tcg counter hardware: common questions

How big is the Tcg counter hardware PCB?

The Tcg counter hardware measures 63 × 88 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tcg counter hardware?

20 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Tcg counter hardware design files?

From the groundst8/tcg-counter-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Tcg counter hardware design in my own project?

Yes, under the terms of its GPL-2.0 license, which groundst8 chose for the repository.

Similar boards