HardLabs

Hauptplatine

GuldeLukas·KiCad·SMB-Lampe/kicad/Hauptplatine/Hauptplatine.kicad_pcb

Hauptplatine PCB layout, top view — open source ESP32 board by GuldeLukas

About the Hauptplatine PCB

Hauptplatine is an open source ESP32 PCB design by GuldeLukas, published on GitHub. It is a 2-layer board measuring 50 × 32 mm, with 8 components from 3 distinct parts.

Its main chip is the ESP32C3 SEEED Studio, from the ESP32 family. Other key parts include the 4-Kanal-I2C Pegelwandler. By type, the board carries 6 connectors and 2 ICs.

From the project

- Version / Stand: 09.03.26 - Verantwortliche Person / Team: Lukas Gulde - Softwareversionen: verwendete KiCad-Version 9.0 - Fertigungsstatus: Prototyp, Dokumentation nicht abgeschlossen - Lizenz / Nutzungsrechte: - Änderungshistorie:

- Version / Stand: 09.03.26 - Verantwortliche Person / Team: Lukas Gulde - Softwareversionen: verwendete KiCad-Version 9.0 - Fertigungsstatus: Prototyp, Dokumentation nicht abgeschlossen - Lizenz / Nutzungsrechte: - Änderungshistorie:

Dort befinden sich unter anderem die Hauptprojektdateien:

- SMB-Lampe.kicadpro` – KiCad-Projektdatei

- Hauptplatine - HinterbeinhintenSeite1LED-P - HinterbeinhintenSeite2LED-P - HinterbeinvorneSeite1LED-P - HinterbeinvorneSeite2LED-P - KörperSeite1 - KörperSeite2

Main components on the Hauptplatine

ESP32C3 SEEED Studio4-Kanal-I2C Pegelwandler

Hauptplatine bill of materials (BOM)

8 components, 3 distinct parts.

QtyPartRefs
1
ESP32C3 SEEED Studio
U1
1
4-Kanal-I2C Pegelwandler
U2
6
Screw_Terminal_01x02
J1, J2, J3, J4, J5, J6

Hauptplatine design files

The KiCad project lives in the GuldeLukas/KiCad repository on GitHub; these links point at the commit this page was built from.

Hauptplatine: common questions

What microcontroller does the Hauptplatine use?

The Hauptplatine is built around the ESP32C3 SEEED Studio, from the ESP32 family.

How big is the Hauptplatine PCB?

The Hauptplatine measures 50 × 32 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hauptplatine?

8 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hauptplatine design files?

From the GuldeLukas/KiCad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Hauptplatine design in my own project?

The repository has no license, so all rights stay with GuldeLukas. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hauptplatine without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in KiCad

Similar boards