HardLabs

Inf microcontroladores

gumadeiras·inf-microcontroladores·projeto/kidcad/shield.kicad_pcb

Inf microcontroladores PCB layout, top view — open source AVR/Arduino board by gumadeiras

About the Inf microcontroladores PCB

Inf microcontroladores is an open source AVR/Arduino PCB design by gumadeiras, published on GitHub under the MIT license. It is a 2-layer board measuring 64.4 × 51 mm, with 16 components from 9 distinct parts.

Its main chip is the Galileo_Gen2_Shield, from the AVR/Arduino family. Other key parts include the LS7366R and BTS7960. By type, the board carries 4 connectors, 4 capacitors, 3 ICs, 2 crystals and 2 resistors.

It belongs with the dev boards & breakouts designs in this gallery.

Main components on the Inf microcontroladores

LS7366RBTS7960

Inf microcontroladores bill of materials (BOM)

16 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
LS7366R
U1, U2
1
BTS7960
IBT-2
U4
2
30MHZ
30MHz
Y1, Y2
2
CONN_01X04_MALE
Conn_01x04_Male
J1, J2
1
CONN_01X03_MALE
Conn_01x03_Male
J3
1
CONN_01X02_MALE
Conn_01x02_Male
J4
1
Galileo_Gen2_Shield
XA1
4
22PF
22pF
C1, C2, C3, C4
2
1M
R1, R2

Inf microcontroladores design files

The KiCad project lives in the gumadeiras/inf-microcontroladores repository on GitHub; these links point at the commit this page was built from.

Inf microcontroladores: common questions

What microcontroller does the Inf microcontroladores use?

The Inf microcontroladores is built around the Galileo_Gen2_Shield, from the AVR/Arduino family.

How big is the Inf microcontroladores PCB?

The Inf microcontroladores measures 64.4 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Inf microcontroladores?

16 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Inf microcontroladores design files?

From the gumadeiras/inf-microcontroladores repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Inf microcontroladores design in my own project?

Yes, under the terms of its MIT license, which gumadeiras chose for the repository.

Can I test firmware for the Inf microcontroladores without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards