Arduino uno Shield
About the Arduino uno Shield
Arduino uno Shield is an open source PCB design by h3xadecima1, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 20 components from 12 distinct parts.
By type, the board carries 7 connectors, 6 resistors, 5 switches and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Microprocessor1
Title: Microprocessor1 Lab Date Created : 01/10/2025
Arduino uno Shield bill of materials (BOM)
20 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | CONN_GYRO | PinSocket_1x08_P2.54mm_Vertical | J9 |
| 1 | CONN_DISPLAY | PinSocket_1x04_P2.54mm_Vertical | J10 |
| 1 | Temp_Digital | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J11 |
| 1 | 10k | Potentiometer_Bourns_3386P_Vertical | RV1 |
| 5 | SW_SPST | SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 5 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R5, R6 |
Arduino uno Shield design files
The KiCad project lives in the h3xadecima1/ENCE_3210_Ali_G repository on GitHub; these links point at the commit this page was built from.
Arduino uno Shield: common questions
How big is the Arduino uno Shield?
The Arduino uno Shield measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arduino uno Shield?
20 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Arduino uno Shield design files?
From the h3xadecima1/ENCE_3210_Ali_G repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Arduino uno Shield design in my own project?
The repository has no license, so all rights stay with h3xadecima1. Use it as a reference, and ask the author before reusing the design.
More boards in ENCE_3210_Ali_G
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979