HardLabs

Test1

HACManchester·Tools.ProxxonCNC·KiCad/Arduino-CNC-Shield/arduino-cnc-shield-2.02/test1.kicad_pcb

Test1 PCB layout, top view — open source AVR/Arduino board by HACManchester

About the Test1 PCB

Test1 is an open source AVR/Arduino PCB design by HACManchester, published on GitHub. It is a 2-layer board measuring 50.3 × 51.3 mm, with 19 components from 17 distinct parts.

Its main chip is the ARDUINO_DUE_SHIELD_LAYOUT, from the AVR/Arduino family. Other key parts include the Z Polulu_Module, Y Polulu_Module and X Polulu_Module. By type, the board carries 8 connectors, 3 ICs, 3 jumpers, 3 capacitors and 1 switch.

It belongs with the robotics & motion designs in this gallery.

From the project

Files in relation to the Proxxon CNC within the Hacspace

Project related information on the setup of the Proxon CNC within the space see the MkDocs directory for documentation

* mkdocs url: http://HACManchester.github.io/Tools.ProxxonCNC

Main components on the Test1

Z Polulu_ModuleY Polulu_ModuleX Polulu_Module

Test1 bill of materials (BOM)

19 components, 17 distinct parts.

QtyPartRefs
1
Z Polulu_Module
U4
1
Y Polulu_Module
U5
1
X Polulu_Module
U6
1
Z-MICRO-JUMPER
P1
1
Y-MICRO-JUMPER
P2
1
MAIN AUX
P3
1
X-MICRO-JUMPER
P4
1
MOTOR POWER
P8
1
SERIAL IO
P9
1
I2C
P10
1
LOGIC POWER
P11
1
Z AXIS
JP1
1
Y AXIS
JP8
1
X AXIS
JP9
1
ARDUINO_DUE_SHIELD_LAYOUT
SHIELD1
1
Switch_DPST
SW1
3
100uF 25V
C4, C5, C6

Test1 design files

The KiCad project lives in the HACManchester/Tools.ProxxonCNC repository on GitHub; these links point at the commit this page was built from.

Test1: common questions

What microcontroller does the Test1 use?

The Test1 is built around the ARDUINO_DUE_SHIELD_LAYOUT, from the AVR/Arduino family.

How big is the Test1 PCB?

The Test1 measures 50.3 × 51.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Test1?

19 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Test1 design files?

From the HACManchester/Tools.ProxxonCNC repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Test1 design in my own project?

The repository has no license, so all rights stay with HACManchester. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Test1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Tools.ProxxonCNC

Similar boards