Arduino cnc shield-2.02
About the Arduino cnc shield-2.02
Arduino cnc shield-2.02 is an open source AVR/Arduino PCB design by HACManchester, published on GitHub. It is a 2-layer board measuring 50.3 × 51.3 mm, with 19 components from 17 distinct parts.
Its main chip is the ARDUINO_DUE_SHIELD_LAYOUT, from the AVR/Arduino family. Other key parts include the Z Polulu_Module, Y Polulu_Module and X Polulu_Module. By type, the board carries 8 connectors, 3 ICs, 3 jumpers, 3 capacitors and 1 switch.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
Files in relation to the Proxxon CNC within the Hacspace
Project related information on the setup of the Proxon CNC within the space see the MkDocs directory for documentation
* mkdocs url: http://HACManchester.github.io/Tools.ProxxonCNC
Main components on the Arduino cnc shield-2.02
Arduino cnc shield-2.02 bill of materials (BOM)
19 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Z Polulu_Module | Pololu_Module | U4 |
| 1 | Y Polulu_Module | Pololu_Module | U5 |
| 1 | X Polulu_Module | Pololu_Module | U6 |
| 1 | Z-MICRO-JUMPER | Pin_Header_Straight_2x03 | P1 |
| 1 | Y-MICRO-JUMPER | Pin_Header_Straight_2x03 | P2 |
| 1 | MAIN AUX | Pin_Header_Straight_2x13 | P3 |
| 1 | X-MICRO-JUMPER | Pin_Header_Straight_2x03 | P4 |
| 1 | MOTOR POWER | bornier2 | P8 |
| 1 | SERIAL IO | Pin_Header_Straight_1x02 | P9 |
| 1 | I2C | Pin_Header_Straight_1x03 | P10 |
| 1 | LOGIC POWER | Pin_Header_Straight_1x02 | P11 |
| 1 | Z AXIS | Pin_Header_Straight_1x04 | JP1 |
| 1 | Y AXIS | Pin_Header_Straight_1x04 | JP8 |
| 1 | X AXIS | Pin_Header_Straight_1x04 | JP9 |
| 1 | ARDUINO_DUE_SHIELD_LAYOUT | ARDUINO_SHIELD_2_SMALLPAD | SHIELD1 |
| 1 | Switch_DPST | Switch_DPST | SW1 |
| 3 | 100uF 25V | Elko_vert_11.5x8mm_RM3.5 | C4, C5, C6 |
Arduino cnc shield-2.02 design files
The KiCad project lives in the HACManchester/Tools.ProxxonCNC repository on GitHub; these links point at the commit this page was built from.
Arduino cnc shield-2.02: common questions
What microcontroller does the Arduino cnc shield-2.02 use?
The Arduino cnc shield-2.02 is built around the ARDUINO_DUE_SHIELD_LAYOUT, from the AVR/Arduino family.
How big is the Arduino cnc shield-2.02?
The Arduino cnc shield-2.02 measures 50.3 × 51.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arduino cnc shield-2.02?
19 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Arduino cnc shield-2.02 design files?
From the HACManchester/Tools.ProxxonCNC repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Arduino cnc shield-2.02 design in my own project?
The repository has no license, so all rights stay with HACManchester. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Arduino cnc shield-2.02 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Tools.ProxxonCNC
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k