2213 PHOTO DIODE BUFFER AMP
About the 2213 PHOTO DIODE BUFFER AMP PCB
2213 PHOTO DIODE BUFFER AMP is an open source PCB design by hamayanShowa-ele, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 56 components from 19 distinct parts.
Other key parts include the NJM5534 and SQT5-12D0_5A. By type, the board carries 18 capacitors, 11 test points, 10 connectors, 9 resistors, 5 ICs and 2 inductors.
From the project
kicad share data.
Main components on the 2213 PHOTO DIODE BUFFER AMP
2213 PHOTO DIODE BUFFER AMP bill of materials (BOM)
56 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | NJM5534 | ic_DIP-8_W7.62mm | IC1, IC2, IC3, IC4 |
| 1 | SQT5-12D0_5A | u_SQT5-24S05 | U1 |
| 1 | MJ-179P | cn_MJ-179P | CN1 |
| 4 | B2B-XH-A | cn_B2B-XH-A | CN2, CN3, CN4, CN5 |
| 1 | S4B-XH-A | cn_S4B-XH-A | CN6 |
| 4 | B-057-HP | cn_BNC_B-057-HP | CN7, CN8, CN9, CN10 |
| 6 | LC-2-G | tp_LC-2-G | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | ST-2-1 | tp_LC-2-G | TP7, TP8, TP9, TP10, TP11 |
| 1 | GREEN | LED_D3.0mm_center | LED1 |
| 2 | 4.7uH | l_LAL04SK4R7K | L1, L2 |
| 1 | 220uF/10V | CP_Radial_D8.00mm_P2.50mm | C1 |
| 1 | 1000pF/3KV | C_DEBB33F102KA | C2 |
| 2 | 10uF/25V | CP_D6R3_P2R5 | C3, C4 |
| 2 | 47uF/25V | CP_D6R3_P2R5 | C5, C6 |
| 8 | 0.1uF | C_TH_5R08 | C7, C8, C9, C10, C11, C12, C13, C14 |
| 4 | 51pF | C_TH_5R08 | C15, C16, C17, C18 |
| 4 | 1K | R_TH_5R08 | R1, R2, R3, R4 |
| 4 | 51 | R_TH_5R08 | R5, R6, R7, R8 |
| 1 | 470 | R_TH_5R08 | R9 |
2213 PHOTO DIODE BUFFER AMP design files
The KiCad project lives in the hamayanShowa-ele/kicad_share repository on GitHub; these links point at the commit this page was built from.
2213 PHOTO DIODE BUFFER AMP: common questions
How big is the 2213 PHOTO DIODE BUFFER AMP PCB?
The 2213 PHOTO DIODE BUFFER AMP measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2213 PHOTO DIODE BUFFER AMP?
56 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the 2213 PHOTO DIODE BUFFER AMP design files?
From the hamayanShowa-ele/kicad_share repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 2213 PHOTO DIODE BUFFER AMP design in my own project?
The repository has no license, so all rights stay with hamayanShowa-ele. Use it as a reference, and ask the author before reusing the design.
More boards in kicad_share
STM322102 DIO 0808
102 × 86 mm227 parts4LNo license0
2116 NEW UNIT PULSE IN 64
166 × 180 mm176 parts2LNo license0
2204 UNIT ANALOG PROTECT BOARD
195 × 70 mm157 parts2LNo license0
2212 PHOTO DIODE PRE AMP
100 × 100 mm151 parts2LNo license0
Serial Communication Selector
100 × 100 mm83 parts2LNo license0
Media converter 02
100 × 100 mm63 parts2LNo license0
1812 C-BUS EMULATOR
100 × 148.7 mm56 parts2LNo license0
MatrixLEDcontrol
76 × 92 mm49 parts2LNo license0
ESP32ESP DEV BOARD
76 × 92 mm42 parts2LNo license0
AnalogDiscovery2TestBench
80 × 91 mm35 parts2LNo license0
Logic analyzer adapter
80 × 72 mm14 parts2LNo license0