ESP DEV BOARD
About the ESP DEV BOARD
ESP DEV BOARD is an open source ESP32 PCB design by hamayanShowa-ele, published on GitHub. It is a 2-layer board measuring 76 × 92 mm, with 42 components from 26 distinct parts.
Its main chip is the ESP32-DevKitC-32E, from the ESP32 family. Other key parts include the OSRB38C9AA, BME680 and CCS811. By type, the board carries 15 resistors, 5 capacitors, 4 connectors, 4 switches, 3 ICs and 3 test points.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
kicad share data.
Main components on the ESP DEV BOARD
ESP DEV BOARD bill of materials (BOM)
42 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OSRB38C9AA | ic_OSRB38C9AA | IC1 |
| 1 | BME680 | pcb_BME680_strawberry-linux | U1 |
| 1 | CCS811 | pcb_CCS811_strawberry-linux | U2 |
| 1 | MJ-179P | MJ-179P | CN1 |
| 1 | B6B-XH-A | cn_B6B-XH-A | CN2 |
| 1 | DM3AT-SF-PEJM5 | cn_DM3AT-SF-PEJM5 | CN3 |
| 1 | PH-1X10RG(2) | cn_PH-1X10RG_2 | CN7 |
| 2 | JUMPER2*1 | JP_JUMPER1x2 | JP1, JP2 |
| 1 | ESP32-DevKitC-32E | pcb_ESP32-DevKitC | PCB1 |
| 1 | ARDUINO_UNO | pcb_ARDUINO_UNO | PCB2 |
| 4 | SKHHBY | SKHHBY | SW1, SW2, SW3, SW4 |
| 1 | LC-2-G | LC-2-G | TP1 |
| 2 | ST-2-1 | LC-2-G | TP2, TP3 |
| 1 | BLUE | C_0603 | LED1 |
| 1 | GREEN | C_0603 | LED2 |
| 1 | Ir LED | led_5mmLED | LED3 |
| 1 | NR3015T220M | NR3010 | L1 |
| 1 | 220uF/10V | CP_Radial_D8.25mm_P3.80mm | C1 |
| 2 | 100pF | C_0603 | C2, C3 |
| 1 | 10uF | C_0805 | C4 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47uF/16V | CP_Radial_D5.0mm_P2.00mm | C5 |
| 6 | 4.7K | C_0603 | R1, R2, R9, R10, R11, R12 |
| 6 | 1K | C_0603 | R3, R4, R5, R6, R7, R8 |
| 1 | 100 | C_0603 | R13 |
| 1 | 20K | C_0603 | R14 |
| 1 | 47 | C_0603 | R15 |
ESP DEV BOARD design files
The KiCad project lives in the hamayanShowa-ele/kicad_share repository on GitHub; these links point at the commit this page was built from.
ESP DEV BOARD: common questions
What microcontroller does the ESP DEV BOARD use?
The ESP DEV BOARD is built around the ESP32-DevKitC-32E, from the ESP32 family.
How big is the ESP DEV BOARD?
The ESP DEV BOARD measures 76 × 92 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP DEV BOARD?
42 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP DEV BOARD design files?
From the hamayanShowa-ele/kicad_share repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ESP DEV BOARD design in my own project?
The repository has no license, so all rights stay with hamayanShowa-ele. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP DEV BOARD without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in kicad_share
STM322102 DIO 0808
102 × 86 mm227 parts4LNo license0
2116 NEW UNIT PULSE IN 64
166 × 180 mm176 parts2LNo license0
2204 UNIT ANALOG PROTECT BOARD
195 × 70 mm157 parts2LNo license0
2212 PHOTO DIODE PRE AMP
100 × 100 mm151 parts2LNo license0
Serial Communication Selector
100 × 100 mm83 parts2LNo license0
Media converter 02
100 × 100 mm63 parts2LNo license0
2213 PHOTO DIODE BUFFER AMP
100 × 100 mm56 parts2LNo license0
1812 C-BUS EMULATOR
100 × 148.7 mm56 parts2LNo license0
MatrixLEDcontrol
76 × 92 mm49 parts2LNo license0
AnalogDiscovery2TestBench
80 × 91 mm35 parts2LNo license0
Logic analyzer adapter
80 × 72 mm14 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k