Power Supply
Hardware7253·OperationUrd·cad/PCBs/power_supply/power_supply.kicad_pcb
About the Power Supply PCB
Power Supply is an open source PCB design by Hardware7253, published on GitHub under the MIT license. It is a 2-layer board measuring 74 × 39 mm, with 16 components from 15 distinct parts.
Other key parts include the MAX1771ESA+T. By type, the board carries 6 capacitors, 2 connectors, 2 resistors, 1 IC, 1 transistor and 1 diode.
It belongs with the displays & leds and power & battery designs in this gallery.
From the project
A nixie tube clock inspired by the divergence meter from Steins;Gate.
Designed in KiCad and Onshape, programmed in Rust.
Main components on the Power Supply
Power Supply bill of materials (BOM)
16 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX1771ESA+T | SO-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | IRF644PBF | TO-220-3_Vertical | Q1 |
| 2 | Conn_01x10_Pin | IDC-Header_2x05_P2.54mm_Vertical | J2, J3 |
| 1 | 0.05R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RS1 |
| 1 | 10k | Potentiometer_Bourns_3266W_Vertical | RV1 |
| 1 | ES2F-E3/5BT | D_SMB | D1 |
| 1 | 100uH | SMDRS1275-101N | L1 |
| 1 | 68u | EEE-FN1E680P | C1 |
| 1 | 1u | C_0603_1608Metric | C2 |
| 1 | 100p/250v | C_0805_2012Metric | C3 |
| 1 | 4.7u/250v | CP_Radial_D8.0mm_P3.50mm | C4 |
| 1 | 100n/250v | C_1206_3216Metric | C5 |
| 1 | 100n | C_0603_1608Metric | C6 |
| 1 | 1M5 | R_2512_6332Metric | R1 |
| 1 | 10k | R_0603_1608Metric | R2 |
Power Supply design files
The KiCad project lives in the Hardware7253/OperationUrd repository on GitHub; these links point at the commit this page was built from.
Power Supply: common questions
How big is the Power Supply PCB?
The Power Supply measures 74 × 39 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power Supply?
16 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power Supply design files?
From the Hardware7253/OperationUrd repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power Supply design in my own project?
Yes, under the terms of its MIT license, which Hardware7253 chose for the repository.
More boards in OperationUrd
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k