Microcontroller

Hardware7253·OperationUrd·cad/PCBs/microcontroller/microcontroller.kicad_pcb

Microcontroller PCB layout, top view — open source STM32 board by Hardware7253

About the Microcontroller PCB

Microcontroller is an open source STM32 PCB design by Hardware7253, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 39 mm, with 38 components from 22 distinct parts.

Its main chip is the STM32F103CBTx, from the STM32 family. Other key parts include the AMS1117-3.3 and DS3231MZ. By type, the board carries 14 capacitors, 9 resistors, 5 connectors, 3 ICs, 2 jumpers and 2 diodes.

It belongs with the displays & leds designs in this gallery.

From the project

A nixie tube clock inspired by the divergence meter from Steins;Gate.

Designed in KiCad and Onshape, programmed in Rust.

Microcontroller, from the project README
From the project README

Main components on the Microcontroller

Microcontroller bill of materials (BOM)

38 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F103CBTx
U2
1
DS3231MZ
U3
1
8Mhz
Y1
1
USB_C_Receptacle
J1
3
Conn_01x04_Pin
J2, J3, J4
1
Conn_01x10_Pin
J5
1
Battery
BT1
2
SolderJumper_2_Open
JP1, JP2
1
RED
D1
1
D_Zener
D2
1
120R
FB1
1
10u
C1
6
100n
C2, C3, C4, C5, C11, C14
1
10n
C6
2
1u
C7, C8
2
22u
C9, C10
2
14p
C12, C13
3
2k2
R1, R6, R7
3
10k
R2, R5, R8
Show 2 more
QtyPartRefs
2
5k1
R3, R4
1
5k-500k
R9

Microcontroller design files

The KiCad project lives in the Hardware7253/OperationUrd repository on GitHub; these links point at the commit this page was built from.

Microcontroller: common questions

What microcontroller does the Microcontroller use?

The Microcontroller is built around the STM32F103CBTx, from the STM32 family.

How big is the Microcontroller PCB?

The Microcontroller measures 70 × 39 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Microcontroller?

38 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Microcontroller design files?

From the Hardware7253/OperationUrd repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Microcontroller design in my own project?

Yes, under the terms of its MIT license, which Hardware7253 chose for the repository.

Can I test firmware for the Microcontroller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in OperationUrd

Similar boards