Ir blaster v1
haya1010·ir-blaster-kicad·ir_blaster_v1/ir_blaster_v1.kicad_pcb
About the Ir blaster v1 PCB
Ir blaster v1 is an open source PCB design by haya1010, published on GitHub. It is a 2-layer board measuring 74 × 74 mm, with 13 components from 2 distinct parts.
By type, the board carries 12 resistors and 1 transistor.
From the project
KiCad hardware designs and JLCPCB manufacturing files for the IR blaster project
写真のユニバーサル基板版を、74.0 mm円形・2層PCBとして再構成したKiCad 9プロジェクトです。12灯のLEDとESP32用1×19ピンソケット2本は、ユーザーの指定により DNP(未実装) とし、スルーホール、極性表示、外向き矢印だけを用意しています。
- BOARDDIAMETERMM = 74.0 - 2-layer FR-4、1.6 mm、1 oz - 推奨色: White solder mask / Black silkscreen - ESP32 DevKitC V4: 2.54 mmピッチ×19、2列間隔25.40 mm、基板幅27.94 mm - IR LED: 12個。広角4個(0/90/180/270°)、狭角8個(その間の30°刻み) - LED/ESP32ソケット: DNP、ユーザー手はんだ - GPIO25 → 220 Ω → INK021ABS1 gate、10 kΩ pull-down - 5 V–GND: 1000 µF + 100 nF
Ir blaster v1 bill of materials (BOM)
13 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INK021ABS1-T112 ISAHAYA Electronics | INK021ABS1_TO92S | Q1 |
| 12 | 100R 0.25W TBD | R_Axial_DIN0207_P10.16mm | R1, R2, R3, R4, R5, R6, R7, R8 +4 |
Ir blaster v1 design files
The KiCad project lives in the haya1010/ir-blaster-kicad repository on GitHub; these links point at the commit this page was built from.
Ir blaster v1: common questions
How big is the Ir blaster v1 PCB?
The Ir blaster v1 measures 74 × 74 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ir blaster v1?
13 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ir blaster v1 design files?
From the haya1010/ir-blaster-kicad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Ir blaster v1 design in my own project?
The repository has no license, so all rights stay with haya1010. Use it as a reference, and ask the author before reusing the design.