M5 ir blaster
haya1010·ir-blaster-kicad
About the M5 ir blaster PCB
M5 ir blaster is an open source PCB design by haya1010, published on GitHub. It is a 2-layer board measuring 52 × 40 mm, with 19 components from 14 distinct parts.
Other key parts include the MCP1700-3302 and TSOP38238. By type, the board carries 7 resistors, 4 diodes, 4 capacitors, 2 ICs, 1 transistor and 1 connector.
From the project
KiCad hardware designs and JLCPCB manufacturing files for the IR blaster project
M5 Atom または ESP32 から家電を操作するための、赤外線送受信ボードです。 既存の m5-ir-remote-studio の初期設定に合わせ、送信は GPIO26、受信は GPIO32 を想定しています。
- 940 nm 高出力IR LEDを3灯同時にパルス駆動 - AO3400A MOSFETでESP32のGPIOを保護 - TSOP38238(38 kHz)でリモコン信号を受信 - 受信部を3.3 Vで動かし、ESP32入力へ安全な電圧で返す - TX動作確認用の可視LED - JST-PH 4ピンでM5 Atom/ESP32へ接続 - 52 × 40 mm、M3穴4個
J1のシルク面表記は左から TX / RX / 5V / GND です。Groveケーブルは製品により信号線の割り当てが異なるため、色だけで判断せず導通を確認してください。
Main components on the M5 ir blaster
M5 ir blaster bill of materials (BOM)
19 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1700-3302 | SOT-23 | U1 |
| 1 | TSOP38238 | TSOP_3pin_P2.54 | U2 |
| 1 | AO3400A Alpha & Omega Semiconductor | SOT-23 | Q1 |
| 1 | DNP GROVE_M5_PORT User supplied | JST_PH_1x04_P2.00mm_Vertical | J1 |
| 1 | OSI5LA7WA1B IR_LED_940nm OptoSupply | LED_D5.0mm_IR | D1 |
| 2 | OSI5LA5A33A-B IR_LED_940nm OptoSupply | LED_D5.0mm_IR | D2, D3 |
| 1 | OSI5LA7WA1B TX_VISIBLE OptoSupply | LED_D3.0mm | D4 |
| 2 | 1uF | C_0805 | C1, C2 |
| 1 | 4.7uF | C_0805 | C3 |
| 1 | 100nF | C_0805 | C4 |
| 2 | 1206W4F1000T5E 100R UNI-ROYAL | R_0805 | R1, R6 |
| 1 | 1206W4F1000T5E 100k UNI-ROYAL | R_0805 | R2 |
| 3 | 1206W4F1000T5E 33R UNI-ROYAL | R_0805 | R3, R4, R5 |
| 1 | 1206W4F1000T5E 1k UNI-ROYAL | R_0805 | R7 |
M5 ir blaster design files
The KiCad project lives in the haya1010/ir-blaster-kicad repository on GitHub; these links point at the commit this page was built from.
M5 ir blaster: common questions
How big is the M5 ir blaster PCB?
The M5 ir blaster measures 52 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the M5 ir blaster?
19 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the M5 ir blaster design files?
From the haya1010/ir-blaster-kicad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the M5 ir blaster design in my own project?
The repository has no license, so all rights stay with haya1010. Use it as a reference, and ask the author before reusing the design.