Ir blaster v2 smd

haya1010·ir-blaster-kicad·ir_blaster_v2_smd/ir_blaster_v2_smd.kicad_pcb

Ir blaster v2 smd PCB layout, top view — open source board by haya1010

About the Ir blaster v2 smd PCB

Ir blaster v2 smd is an open source PCB design by haya1010, published on GitHub. It is a 2-layer board measuring 74 × 74 mm, with 13 components from 2 distinct parts.

By type, the board carries 12 resistors and 1 transistor.

From the project

KiCad hardware designs and JLCPCB manufacturing files for the IR blaster project

Cost-optimized derivative of irblasterv1.

- User hand solder: D1-D12 IR LEDs, J1/J2 ESP32 DevKit sockets, Cbulk 1000 uF - JLCPCB top-side SMT: R1-R12, RG, RPD, Q1, Cdec - R1-R12 use 1206 250 mW parts for LED-current resistor power margin - Q1 changes from the THT INK021ABS1 to the 3.3 V logic-level AO3400A (SOT-23) - Electrical control remains GPIO25 through 220 ohm gate resistance with 10 kohm pull-down

Ir blaster v2 smd bill of materials (BOM)

13 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AO3400A
Alpha & Omega Semiconductor
Q1
12
1206W4F1000T5E
100R 0.25W
UNI-ROYAL
R1, R2, R3, R4, R5, R6, R7, R8 +4

Ir blaster v2 smd design files

The KiCad project lives in the haya1010/ir-blaster-kicad repository on GitHub; these links point at the commit this page was built from.

Ir blaster v2 smd: common questions

How big is the Ir blaster v2 smd PCB?

The Ir blaster v2 smd measures 74 × 74 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ir blaster v2 smd?

13 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ir blaster v2 smd design files?

From the haya1010/ir-blaster-kicad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ir blaster v2 smd design in my own project?

The repository has no license, so all rights stay with haya1010. Use it as a reference, and ask the author before reusing the design.

More boards in ir-blaster-kicad