Raspberrypi hat
hcmos·kicad-2024·raspberrypi_hat/raspberrypi_hat.kicad_pcb
About the Raspberrypi hat
Raspberrypi hat is an open source PCB design by hcmos, published on GitHub. It is a 2-layer board measuring 36.2 × 52.7 mm, with 16 components from 10 distinct parts.
Other key parts include the MCP2515-I/P and MCP2562FD-E/P. By type, the board carries 4 resistors, 3 capacitors, 2 ICs, 1 crystal and 1 connector.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
oscillator=は外部クロックに合わせる.interrupt=は配線したGPIOを指定. 書き終わったらreboot!
oscillator=は外部クロックに合わせる.interrupt=は配線したGPIOを指定. 書き終わったらreboot!
ビットレートは環境に合わせて変更.->ifconifgにCAN0が出てくるはず.
あとはsocketcanif`などのパッケージでlinux-canで触ってみる.

Main components on the Raspberrypi hat
Raspberrypi hat bill of materials (BOM)
16 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2515-I/P MCP2515-I_P | DIP794W56P254L2286H533Q18N | IC1 |
| 1 | MCP2562FD-E/P MCP2562FD-E_P | DIP781W56P254L950H533Q8N | IC2 |
| 1 | Resonator | Resonator_Murata_CSTLSxxxX-3Pin_W5.5mm_H3.0mm | Y1 |
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 3 | B04B-XASK-1(LF)(SN) B04B-XASK-1_LF__SN_ | SHDR4W60P0X250_1X4_1250X640X880P | CAN1, I2C1, UART1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | FAN1 |
| 1 | B02B-XASK-1 | SHDR2W60P0X250_1X2_750X640X880P | GPIO24 |
| 3 | 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3 |
| 3 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 1 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
Raspberrypi hat design files
The KiCad project lives in the hcmos/kicad-2024 repository on GitHub; these links point at the commit this page was built from.
Raspberrypi hat: common questions
How big is the Raspberrypi hat?
The Raspberrypi hat measures 36.2 × 52.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Raspberrypi hat?
16 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Raspberrypi hat design files?
From the hcmos/kicad-2024 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Raspberrypi hat design in my own project?
The repository has no license, so all rights stay with hcmos. Use it as a reference, and ask the author before reusing the design.
More boards in kicad-2024
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979