Stmservo
he1k·stmservo·pcb/stmboard/stmboard.kicad_pcb
About the Stmservo PCB
Stmservo is an open source STM32 PCB design by he1k, published on GitHub. It is a 4-layer board measuring 60 × 60 mm, with 70 components from 36 distinct parts.
Its main chip is the STM32L412KBTX, from the STM32 family. Other key parts include the TPD2EUSB30DRTR, TLV76733DRVR, 2N24000G33YC, DRV8873H and SN74HC164PWR. By type, the board carries 24 capacitors, 16 resistors, 9 diodes, 7 ICs, 7 connectors and 2 inductors.
It belongs with the robotics & motion designs in this gallery.
From the project
"#STM32 based brushed DC motor servo board"
Main components on the Stmservo
Stmservo bill of materials (BOM)
70 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L412KBTX STM32L412KBTx | LQFP-32_7x7mm_P0.8mm | IC1 |
| 1 | TPD2EUSB30DRTR | Texas_DRT-3 | IC2 |
| 1 | TLV76733DRVR | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | IC3 |
| 1 | 2N24000G33YC | Crystal_SMD_2520-4Pin_2.5x2.0mm | IC4 |
| 1 | DRV8873H | HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x2.98mm_ThermalVias | IC5 |
| 1 | SN74HC164PWR | TSSOP-14_4.4x5mm_P0.65mm | IC6 |
| 1 | INA240A1D | SOIC-8_3.9x4.9mm_P1.27mm | IC7 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | C136000 USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J1 |
| 2 | sw_pwr | PinHeader_1x03_P2.54mm_Vertical | J2, J7 |
| 2 | I2C | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J3, J4 |
| 1 | C428721 PWR_Conn | AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J5 |
| 1 | C108769 Motor_Conn | AMASS_XT30UPB-F_1x02_P5.0mm_Vertical | J6 |
| 3 | jlcpcb_tooling_hole | jlcpcb_tooling_hole | REF1, REF3, REF4 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 8 | C471422 GREEN | LED_0402_1005Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | C2290 YELLOW | LED_0603_1608Metric | D9 |
| 1 | C845115 600 @ 100MHz | L_0805_2012Metric | FB1 |
| 1 | 39N 39n | L_0402_1005Metric | L1 |
| 2 | 4U7 4u7 | C_0402_1005Metric | C1, C2 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 100N 100n | C_0402_1005Metric | C3, C4, C10, C13, C16, C21 |
| 3 | 10U 10u | C_1206_3216Metric | C5, C6, C7 |
| 3 | 100N 100n | C_1206_3216Metric | C8, C14, C15 |
| 1 | 1u | C_0402_1005Metric | C9 |
| 1 | 10N 10n | C_0402_1005Metric | C11 |
| 1 | 4U7 4u7 | C_1206_3216Metric | C12 |
| 1 | 47N 47n | C_0402_1005Metric | C17 |
| 2 | 220U 220u | CP_Elec_6.3x7.7 | C18, C20 |
| 2 | 1u | C_0603_1608Metric | C19, C24 |
| 1 | 10N 10n | C_0603_1608Metric | C22 |
| 1 | 100N 100n | C_0603_1608Metric | C23 |
| 9 | 220 | R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 2 | 2K2 2k2 | R_0402_1005Metric | R9, R10 |
| 3 | 10K 10k | R_0402_1005Metric | R11, R15, R16 |
| 1 | 15M 15m | R_1206_3216Metric | R13 |
| 1 | 200K 200k | R_0402_1005Metric | R14 |
Stmservo design files
The KiCad project lives in the he1k/stmservo repository on GitHub; these links point at the commit this page was built from.
Stmservo: common questions
What microcontroller does the Stmservo use?
The Stmservo is built around the STM32L412KBTX, from the STM32 family.
How big is the Stmservo PCB?
The Stmservo measures 60 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Stmservo?
70 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stmservo design files?
From the he1k/stmservo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stmservo design in my own project?
The repository has no license, so all rights stay with he1k. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stmservo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k