HardLabs

BaBot Base THT 4067 Module 2Layer DRAFT

Hemlock-white·Babot_revisioned_Mechatronics_TermProject·history/PCB/base_2layer_draft/BaBot_Base_THT_4067_Module_2Layer_DRAFT.kicad_pcb

BaBot Base THT 4067 Module 2Layer DRAFT layout, top view — open source AVR/Arduino board by Hemlock-white

About the BaBot Base THT 4067 Module 2Layer DRAFT

BaBot Base THT 4067 Module 2Layer DRAFT is an open source AVR/Arduino PCB design by Hemlock-white, published on GitHub. It is a 2-layer board measuring 100 × 98.9 mm, with 16 components from 14 distinct parts.

Its main chip is the Arduino Micro A000053, from the AVR/Arduino family. Other key parts include the CD74HC4067 Module, 20-way header to Plate and Red LED 3mm. By type, the board carries 4 ICs, 4 resistors, 2 capacitors, 1 connector and 1 switch.

From the project

initialTHTBase/ preserves the first Base conversion, before the multiplexer module and trimmer changes. The early state is also represented by the second commit in this repository.

initialTHTBase/ preserves the first Base conversion, before the multiplexer module and trimmer changes. The early state is also represented by the second commit in this repository.

base2layerdraft/ preserves the later two-layer Base attempt. It is not fabrication-ready: the last recorded DRC had six signal connections and one ground connection open. base2layertrials/ contains intermediate routing experiments. Open these only as historical design files, not as the current Base.

Main components on the BaBot Base THT 4067 Module 2Layer DRAFT

CD74HC4067 Module20-way header to PlateArduino Micro A000053Red LED 3mm

BaBot Base THT 4067 Module 2Layer DRAFT bill of materials (BOM)

16 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CD74HC4067 Module
U1
1
20-way header to Plate
U3
1
Arduino Micro A000053
U4
1
Red LED 3mm
U15
1
5V servo power input
J1
1
Servo signal/+5V/GND
H1
1
Servo signal/+5V/GND
H2
1
Servo signal/+5V/GND
H3
1
3296W-1-104LF 100k
RV1
1
Momentary NO
SW1
1
220nF leaded ceramic
C1
1
10uF 16V
C5
2
10K
10k
R1, R7
2
500
R10, R18

BaBot Base THT 4067 Module 2Layer DRAFT design files

The KiCad project lives in the Hemlock-white/Babot_revisioned_Mechatronics_TermProject repository on GitHub; these links point at the commit this page was built from.

BaBot Base THT 4067 Module 2Layer DRAFT: common questions

What microcontroller does the BaBot Base THT 4067 Module 2Layer DRAFT use?

The BaBot Base THT 4067 Module 2Layer DRAFT is built around the Arduino Micro A000053, from the AVR/Arduino family.

How big is the BaBot Base THT 4067 Module 2Layer DRAFT?

The BaBot Base THT 4067 Module 2Layer DRAFT measures 100 × 98.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BaBot Base THT 4067 Module 2Layer DRAFT?

16 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BaBot Base THT 4067 Module 2Layer DRAFT design files?

From the Hemlock-white/Babot_revisioned_Mechatronics_TermProject repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BaBot Base THT 4067 Module 2Layer DRAFT design in my own project?

The repository has no license, so all rights stay with Hemlock-white. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the BaBot Base THT 4067 Module 2Layer DRAFT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Babot_revisioned_Mechatronics_TermProject

Similar boards