Motor subsystem
About the Motor subsystem PCB
Motor subsystem is an open source PCB design by HenryLi-0, published on GitHub under the Custom license license. It is a 2-layer board measuring 100 × 100 mm, with 17 components from 8 distinct parts.
Other key parts include the MCU_SEEED_XIAO_ESP32-C3. By type, the board carries 6 diodes, 6 inductors, 3 resistors and 2 ICs.
It belongs with the displays & leds designs in this gallery.
From the project
A spinning LED light display! (Made for Hack Club's Highway YSWS!)
Checkout these folders!: - LED Subsystem - for the LED display logic (lots of LEDs!) - Motor Subsystem - for the logic and power controlling the motor (lots of power!) - LED Panel - for the LED Panel (this is made 5 times!)
Main components on the Motor subsystem
Motor subsystem bill of materials (BOM)
17 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCU_SEEED_XIAO_ESP32-C3 MCU_Seeed_XIAO_ESP32-C3 | Seeed_XIAO_RP2040 | U1 |
| 1 | ~ | AOD424 | U2 |
| 1 | 1N5822 | D_DO-201AD_P15.24mm_Horizontal | D1 |
| 3 | 30SQ045 | R_Axial_DIN0918_L18.0mm_D9.0mm_P25.40mm_Horizontal | D2, D3, D6 |
| 2 | Diode | Diode_DO-35 | D4, D5 |
| 6 | LED_WS2812B | LED_WS2812B | L1, L2, L3, L4, L5, L6 |
| 1 | Resistor | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1 |
| 2 | Resistor | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R2, R3 |
Motor subsystem design files
The KiCad project lives in the HenryLi-0/raven repository on GitHub; these links point at the commit this page was built from.
Motor subsystem: common questions
How big is the Motor subsystem PCB?
The Motor subsystem measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Motor subsystem?
17 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Motor subsystem design files?
From the HenryLi-0/raven repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Motor subsystem design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
atopile
AxxAxx
eez-open