HardLabs

KiCad Project

Hieupham0012·File-case3D-Firmware-Keyboard·firmware/code corne sofle pipar antari tổng hợp/Bonzo-main/KiCad Projects/Bonzo_PCB/KiCad Project.kicad_pcb

KiCad Project PCB layout, top view — open source AVR/Arduino board by Hieupham0012

About the KiCad Project PCB

KiCad Project is an open source AVR/Arduino PCB design by Hieupham0012, published on GitHub. It is a 2-layer board measuring 257.2 × 95.3 mm, with 109 components from 8 distinct parts.

Its main chip is the ProMicro, from the AVR/Arduino family. By type, the board carries 54 diodes and 1 IC.

It belongs with the keyboards and power & battery designs in this gallery.

From the project

https://github.com/AcheronProject/AlexandriaLibrary https://github.com/keebio/Keebio-Parts.pretty https://github.com/ai03-2725/MXAlpsHybrid/tree/master/MX_Only.pretty

https://github.com/AcheronProject/AlexandriaLibrary https://github.com/keebio/Keebio-Parts.pretty https://github.com/ai03-2725/MXAlpsHybrid/tree/master/MX_Only.pretty

The provided gerbers have been created according to the specifications of JLCpcb. For plate the size is 275.3mm * 113.4mm

The case is designed to be cut out of 3mm acryllic and uses a 1.5mm switchplate.

KiCad Project, from the project README
From the project README

Main components on the KiCad Project

ProMicro

KiCad Project bill of materials (BOM)

109 components, 8 distinct parts.

QtyPartRefs
1
ProMicro
U1
47
MX-NoLED
MX1, MX2, MX3, MX4, MX5, MX6, MX-1, MX:1 +39
3
MX-NoLED
MXALT1, MXCTRL1, MXTAB1
1
MX-NoLED
MXENTER1
1
MX-NoLED
MXSHIFT1
1
MX-NoLED
MXSPACE1
1
MX-NoLED
MXSPACE3
54
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +46

KiCad Project design files

The KiCad project lives in the Hieupham0012/File-case3D-Firmware-Keyboard repository on GitHub; these links point at the commit this page was built from.

KiCad Project: common questions

What microcontroller does the KiCad Project use?

The KiCad Project is built around the ProMicro, from the AVR/Arduino family.

How big is the KiCad Project PCB?

The KiCad Project measures 257.2 × 95.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the KiCad Project?

109 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the KiCad Project design files?

From the Hieupham0012/File-case3D-Firmware-Keyboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the KiCad Project design in my own project?

The repository has no license, so all rights stay with Hieupham0012. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the KiCad Project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards