USB-Hub

hiralsinghal·USB-Hub·PCB/USB-Hub.kicad_pcb

USB-Hub PCB layout, top view — open source board by hiralsinghal

About the USB-Hub PCB

USB-Hub is an open source PCB design by hiralsinghal, published on GitHub. It is a 2-layer board measuring 60 × 38 mm, with 26 components from 8 distinct parts.

Other key parts include the SL2.1s and USBLC6-2SC6-ES. By type, the board carries 11 capacitors, 6 resistors and 4 ICs.

It belongs with the usb & debug tools designs in this gallery.

From the project

This is a USB hub. It has a USB-C port to connect to the device. It has two USB-A ports and two USB-C ports, which can be used for connecting more devices as it allows you to increase the number of ports available.

This is a USB hub. It has a USB-C port to connect to the device. It has two USB-A ports and two USB-C ports, which can be used for connecting more devices as it allows you to increase the number of ports available.

- USB-C port to form the connection between the hub and your device. - 2 USB-A ports - 2 USB-C ports

This is the schematic for the USB hub. It has an IC, which makes the hub work.

USB-Hub, from the project README
From the project README

Main components on the USB-Hub

USB-Hub bill of materials (BOM)

26 components, 8 distinct parts.

QtyPartRefs
1
SL2.1s
SL2.1S
CoreChips(和芯润德)
U1
3
USBLC6-2SC6-ES
ElecSuper(静芯)
U2, U3, U4
3
TYPE-C 16PIN 2MD(073)
TYPE-C 16PIN 2MD
SHOU HAN(首韩)
USB1, USB5, USB6
2
10.0 QHHTZB6.3
SHOU HAN(首韩)
USB2, USB3
8
1uF
C1, C2, C3, C4, C5, C6, C8, C10
3
100nF
C7, C9, C11
2
5.1k
R1, R2
4
56k
R3, R4, R5, R6

USB-Hub design files

The KiCad project lives in the hiralsinghal/USB-Hub repository on GitHub; these links point at the commit this page was built from.

USB-Hub: common questions

How big is the USB-Hub PCB?

The USB-Hub measures 60 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USB-Hub?

26 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the USB-Hub design files?

From the hiralsinghal/USB-Hub repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the USB-Hub design in my own project?

The repository has no license, so all rights stay with hiralsinghal. Use it as a reference, and ask the author before reusing the design.

Similar boards