RX621
hirata0517masato·RX621-CMouse·KiCad/RX621-クラシックマウス/RX621.kicad_pcb
About the RX621 PCB
RX621 is an open source Renesas PCB design by hirata0517masato, published on GitHub. It is a 2-layer board measuring 70 × 91.5 mm, with 76 components from 28 distinct parts.
Its main chip is the R5F56218BDFP#V0, from the Renesas family. Other key parts include the NJM7805SDL1-TE1 and TAR5SB33_TE85L,F_. By type, the board carries 24 resistors, 18 capacitors, 7 switches, 4 LEDs, 4 inductors and 3 ICs.
Main components on the RX621
RX621 bill of materials (BOM)
76 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R5F56218BDFP#V0 | QFP50P1600X1600X170-100N | IC1 |
| 1 | NJM7805SDL1-TE1 | NJM7805SDL1TE1 | IC2 |
| 1 | TAR5SB33_TE85L,F_ | SOT95P275X140-5N | IC3 |
| 1 | FC-255_32.768khz | FC255320000KAA0 | X1 |
| 1 | CSTCE_12Mhz | CSTCE12M0G52AR0 | X2 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | CN1 |
| 3 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | BAT1, M_L1, M_R1 |
| 2 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | ENC_L1, ENC_R1 |
| 1 | Gyro1 | PinHeader_1x05_P2.54mm_Vertical | G1 |
| 1 | Gyro2 | PinHeader_1x05_P2.54mm_Vertical | G2 |
| 1 | MotorD1 | PinHeader_1x06_P2.54mm_Vertical | MD1 |
| 1 | MotorD2 | PinHeader_1x06_P2.54mm_Vertical | MD2 |
| 4 | ST-1KL3A | ST1KL3A | S1, S2, S3, S4 |
| 1 | MODE_SW | PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | SW_Push | TVAF06A020BR | SW3 |
| 1 | POW_SW | PinHeader_1x03_P2.54mm_Vertical | SW4 |
| 4 | DTC143ZCAHZGT116 | SOT95P240X120-3N | TR1, TR2, TR3, TR4 |
| 4 | LED | LED_D5.0mm | IR1, IR2, IR3, IR4 |
| 4 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1, L2, L3, L4 |
| 12 | 0.1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C4, C5, C6, C7, C8, C9 +4 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10u/6.3v | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C13 |
| 4 | 0.01u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C15, C16, C17, C18 |
| 2 | 4.7k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 9 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4, R5, R6, R16, R18, R20, R22 +1 |
| 4 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R9, R10 |
| 4 | 0 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11, R12, R13, R14 |
| 4 | 2k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R15, R17, R19, R21 |
| 1 | 20k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R23 |
RX621 design files
The KiCad project lives in the hirata0517masato/RX621-CMouse repository on GitHub; these links point at the commit this page was built from.
RX621: common questions
What microcontroller does the RX621 use?
The RX621 is built around the R5F56218BDFP#V0, from the Renesas family.
How big is the RX621 PCB?
The RX621 measures 70 × 91.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RX621?
76 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the RX621 design files?
From the hirata0517masato/RX621-CMouse repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RX621 design in my own project?
The repository has no license, so all rights stay with hirata0517masato. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RX621 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Renesas firmware against it before you order a PCB.
More boards in RX621-CMouse
Similar boards
Renesas
Bing bong pcb audio
GlobalSequence
40.3 × 108 mm55 parts2LNo license11Renesas
A13board
slapin
50 × 90.4 mm153 parts4LGPL-3.06Renesas
DRC-SVMD2025 Ver2.1
hosh0344
60 × 45 mm54 parts2LNo license2Renesas
Power-Eater
yu65536
132.8 × 93 mm128 parts2LCustom license2Renesas
TouchSensor
tamapochi1
111 × 275 mm51 parts2LNo license2Renesas
DRC-SLVD2025
hosh0344
60 × 45 mm58 parts2LNo license2