DRC-SLVD2025
About the DRC-SLVD2025 PCB
DRC-SLVD2025 is an open source Renesas PCB design by hosh0344, published on GitHub. It is a 2-layer board measuring 60 × 45 mm, with 58 components from 28 distinct parts.
Its main chip is the R7FA4M1AB3CFM_AA0, from the Renesas family. Other key parts include the MCP2562-H-SN and TLP293-4. By type, the board carries 22 resistors, 11 capacitors, 8 connectors, 8 diodes, 4 transistors and 3 ICs.
Main components on the DRC-SLVD2025
DRC-SLVD2025 bill of materials (BOM)
58 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R7FA4M1AB3CFM_AA0 | R7FA4M1AB3CFM | U1 |
| 1 | MCP2562-H-SN | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TLP293-4 | SOIC-16_4.55x10.3mm_P1.27mm | U3 |
| 4 | 2SK4017 | TO230P230X650X740-3P | Q1, Q2, Q3, Q4 |
| 1 | USB | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 2 | CAN | JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J7, J8 |
| 1 | BATTERY | AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J9 |
| 1 | SLV0 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J11 |
| 1 | SLV2 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12 |
| 1 | SLV1 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J13 |
| 1 | SLV3 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J14 |
| 1 | RESET | SW_SPST_EVQPE1 | SW1 |
| 1 | ID | SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm | SW2 |
| 1 | SS2040FL | D_SOD-123F | D1 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 4 | D_Schottky_Small | D_SOD-123F | D3, D4, D5, D6 |
| 1 | +5V | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 3 | 4.7u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5, C7 |
| 6 | 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C6, C8, C9 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220u | CP_Radial_D8.0mm_P3.50mm | C10 |
| 1 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15 |
| 7 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R7, R8, R11 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 5 | 2.4k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R14, R15, R19, R20 |
| 1 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 6 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R17, R18, R21, R22 |
| 1 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
DRC-SLVD2025 design files
The KiCad project lives in the hosh0344/CatchRobo2025_Circuits repository on GitHub; these links point at the commit this page was built from.
DRC-SLVD2025: common questions
What microcontroller does the DRC-SLVD2025 use?
The DRC-SLVD2025 is built around the R7FA4M1AB3CFM_AA0, from the Renesas family.
How big is the DRC-SLVD2025 PCB?
The DRC-SLVD2025 measures 60 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DRC-SLVD2025?
58 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the DRC-SLVD2025 design files?
From the hosh0344/CatchRobo2025_Circuits repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DRC-SLVD2025 design in my own project?
The repository has no license, so all rights stay with hosh0344. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DRC-SLVD2025 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Renesas firmware against it before you order a PCB.
More boards in CatchRobo2025_Circuits
Similar boards
RenesasBing bong pcb audio
GlobalSequence
40.3 × 108 mm55 parts2LNo license11
RenesasA13board
slapin
50 × 90.4 mm153 parts4LGPL-3.06
RenesasPower-Eater
yu65536
132.8 × 93 mm128 parts2LCustom license2
RenesasTouchSensor
tamapochi1
111 × 275 mm51 parts2LNo license2
RenesasBalsun
mzks
64.4 × 53.3 mm79 parts4LCC-BY-SA-4.01
RenesasTickbox hardware
poh0
58 × 36.8 mm29 parts4LNo license0