HardLabs

ProgtomataBoard

hlvs-gnc·ProgtomataBoard

ProgtomataBoard PCB layout, top view — open source STM32 board by hlvs-gnc

About the ProgtomataBoard PCB

ProgtomataBoard is an open source STM32 PCB design by hlvs-gnc, published on GitHub. It is a 2-layer board measuring 3.6 × 3.2 mm, with 62 components from 20 distinct parts.

Its main chip is the STM32F407VGTx, from the STM32 family. Other key parts include the AMS1117-3.3 and 74LS148. By type, the board carries 17 switches, 17 diodes, 16 capacitors, 4 ICs, 3 connectors and 3 resistors.

Main components on the ProgtomataBoard

STM32F407VGTxAMS1117-3.374LS148

ProgtomataBoard bill of materials (BOM)

62 components, 20 distinct parts.

QtyPartRefs
1
STM32F407VGTx
U1
1
AMS1117-3.3
U2
2
74LS148
U3, U4
1
8MHz
Y1
2
Conn_01x04_Pin
J1, J2
1
USB_C_Plug_USB2.0
P1
1
SW_SPDT
SW1
16
SW_Push
SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +8
1
GREEN
D1
16
SK6812MINI-E
D3, D4, D5, D6, D7, D8, D9, D10 +8
1
120R
FB1
8
100n
C1, C2, C3, C4, C5, C6, C7, C12
1
10u
C8
1
10n
C9
2
1u
C10, C11
2
10p
C13, C14
2
22u
C15, C16
1
10k
R1
1
1k5
R2
1
5.1k
R3

ProgtomataBoard design files

The KiCad project lives in the hlvs-gnc/ProgtomataBoard repository on GitHub; these links point at the commit this page was built from.

ProgtomataBoard: common questions

What microcontroller does the ProgtomataBoard use?

The ProgtomataBoard is built around the STM32F407VGTx, from the STM32 family.

How big is the ProgtomataBoard PCB?

The ProgtomataBoard measures 3.6 × 3.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ProgtomataBoard?

62 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the ProgtomataBoard design files?

From the hlvs-gnc/ProgtomataBoard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ProgtomataBoard design in my own project?

The repository has no license, so all rights stay with hlvs-gnc. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ProgtomataBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards