48 open source boards using the STM32F407VGTx

Real designs built with the STM32F407VGTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

48 boardsClear filters|Most starred

How designs wire the STM32F407VGTx

Read from the KiCad layouts of 33 open source designs, one per repository: what each pin of the STM32F407VGTx connects to, and the resistors, capacitors and other passives placed on it.

  • The VCAP_1 pin has a capacitor to GND on 29 of 33 designs, most often 2.2 µF (then 100 nF).
  • The VCAP_2 pin has a capacitor to GND on 29 of 33 designs, most often 2.2 µF (then 100 nF).
  • The VDD pins have a decoupling capacitor on 27 of 33 designs, most often 100 nF (then 4.7 µF).
  • The NRST pin has a capacitor to GND on 25 of 33 designs, most often 100 nF (then 10 nF).
VBATpin 6Connected to: 3.3V 85% · a signal 15%
  • Decoupling capacitor on 70% · 100 nF (39), 4.7 µF (3), 10 nF (2)
VSSpin 10, 27, 74, 99Connected to: GND 97%
VDDpin 11, 19, 28, 50, 75, 100Connected to: 3.3V 100%
  • Decoupling capacitor on 82% · 100 nF (211), 4.7 µF (13), 10 nF (11)
PH0pin 12Connected to: Signal 85% · not connected 15%
  • Crystal on 73% · 8 MHz (14), 25 MHz (4), 16 MHz (3)
  • Capacitor to GND on 70% · 12 pF (4), 10 pF (4), 15 pF (3)
PH1pin 13Connected to: Signal 85% · not connected 15%
  • Crystal on 52% · 8 MHz (12), 25 MHz (3), 18 MHz (1)
  • Capacitor to GND on 48% · 20 pF (3), 10 pF (3), 22 pF (2)
  • Series resistor on 36% · 47 Ω (3), 1 MΩ (3), 220 Ω (3)
NRSTpin 14Connected to: A connector 58%
  • Capacitor to GND on 76% · 100 nF (23), 10 nF (1)
  • Pull-up to 3.3V on 64% · 10 kΩ (14), 100 kΩ (2), 1 kΩ (1)
VSSApin 20Connected to: GND 97%
VREF+pin 21Connected to: 3.3V 64% · a signal 30%
  • Decoupling capacitor on 61% · 100 nF (27), 1 µF (12), 10 nF (4)
VDDApin 22Connected to: 3.3V 85% · a signal 15%
  • Decoupling capacitor on 73% · 100 nF (28), 1 µF (15), 10 nF (6)
VCAP_1pin 49Connected to: Signal 91%
  • Capacitor to GND on 88% · 2.2 µF (24), 100 nF (3), 1 µF (1)
VCAP_2pin 73Connected to: Signal 91%
  • Capacitor to GND on 88% · 2.2 µF (24), 100 nF (3), 2.2 pF (1)
PB6pin 92Connected to: A connector 42% · not connected 21%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (6), 2.2 kΩ (1), 3.3 kΩ (1)
PB7pin 93Connected to: A connector 33% · not connected 30%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (5), 2.2 kΩ (2), 10 kΩ (2)
BOOT0pin 94Connected to: Signal 91%
  • Resistor to GND on 70% · 10 kΩ (13), 100 kΩ (4), 1 kΩ (1)

78 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Noah hardware by GonzaCerv, FastLOGIC by Neumi, STM32-Ethernet-Camera by DanielMartensson and Hw sensor by larus-breeze.

The STM32F407VGTx in open source designs

The gallery holds 48 open source boards using the STM32F407VGTx from 35 GitHub repositories; a typical one measures about 99.5 × 78.4 mm and carries around 94 components.

55% use four copper layers or more, and 31% carry an open source license.

The most starred is Noah hardware by GonzaCerv.

Microcontrollers on boards using the STM32F407VGTx

STM32F407VGTx: common questions

Where can I find a STM32F407VGTx reference design?

Each of the 48 boards on this page is a real design using the STM32F407VGTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the STM32F407VGTx VCAP_1 pin connected?

The VCAP_1 pin has a capacitor to GND on 29 of 33 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 33 open source designs using the STM32F407VGTx.

How is the STM32F407VGTx VCAP_2 pin connected?

The VCAP_2 pin has a capacitor to GND on 29 of 33 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 33 open source designs using the STM32F407VGTx.

What decoupling capacitors do designs use on the STM32F407VGTx VDD pin?

The VDD pins have a decoupling capacitor on 27 of 33 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 33 open source designs using the STM32F407VGTx.

What parts are used alongside the STM32F407VGTx?

The AMS1117-3.3, USBLC6-2SC6, MCP2551-I-SN, AMS1117-5.0 and AP2112K-3.3 appear in the most repositories here.

Which microcontrollers do boards using the STM32F407VGTx use?

Most are built on STM32 (43) and ESP32 (5).

How big is a typical board using the STM32F407VGTx?

The median is 99.5 × 78.4 mm, and 45% are two-layer designs.

What is the most popular open source board using the STM32F407VGTx?

By GitHub stars, Noah hardware by GonzaCerv, with 28 stars.

Can I simulate one of these boards using the STM32F407VGTx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part