OrthusSharp
About the OrthusSharp PCB
OrthusSharp is an open source PCB design by Hob-dev, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 18.6 × 56.7 mm, with 16 components from 8 distinct parts.
By type, the board carries 3 capacitors, 3 resistors, 2 switches, 2 inductors and 1 connector.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
A highly portable split keyboard focused on feeling and sound.
Since nice!view is released, in the future there will be more board designed for nice!view. so I redesign the pinout to be compatible with nice!view pinout, if in the future nice!view is run out of stock, mechkey folk will still have an alternative. DIY is sometimes more expensive, buy Nice!View instead of making this yourself https://nicekeyboards.com/nice-view
OrthusSharp bill of materials (BOM)
16 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C506791 Conn_01x10 | FPC-SMD_10P-P0.50_XUNPU_FPC-05F-10PH15 | J2 |
| 4 | MountingHole | SMD-1_SMTSO1620MTJ | H1, H2, H3, H4 |
| 1 | Conn_01x07_Pin | FPC-SMD_8P-P0.50_XUNPU_FPC-05F-8PH15 | O1 |
| 2 | SW_Push | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H3.5 | SW1, SW2 |
| 2 | C1017 Ferrite_Bead_Small | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1, FB2 |
| 1 | C84721 560pF/680pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 2 | C15849 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 3 | C25804 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
OrthusSharp design files
The KiCad project lives in the Hob-dev/Orthus repository on GitHub; these links point at the commit this page was built from.
OrthusSharp: common questions
How big is the OrthusSharp PCB?
The OrthusSharp measures 18.6 × 56.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OrthusSharp?
16 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OrthusSharp design files?
From the Hob-dev/Orthus repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OrthusSharp design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
atopile
AxxAxx
tzarc