NMEA-2000-Battery-Power

hoellwerth·NMEA-2000-Battery-Power·Electrical/NMEA-2000-BUS-Voltage.kicad_pcb

NMEA-2000-Battery-Power PCB layout, top view — open source STM32 board by hoellwerth
Simulate this board

About the NMEA-2000-Battery-Power PCB

NMEA-2000-Battery-Power is an open source STM32 PCB design by hoellwerth, published on GitHub. It is a 4-layer board measuring 180.3 × 100.3 mm, with 96 components from 42 distinct parts.

Its main chip is the STM32G431CBTX, from the STM32 family. Other key parts include the ADS131M08QPBSRQ1, LM7805_TO220, AMS1117-3.3, MCP2562-E-P and BMP280. By type, the board carries 30 capacitors, 26 resistors, 13 connectors, 7 ICs, 7 diodes and 4 jumpers.

It belongs with the sensors and power & battery designs in this gallery.

From the project

Reads the voltage & current of a sailing boat and posts it into the NMEA-2000 BUS

- Symbol The Symbols for the schematics - Datasheets Datasheets of the components - 3D-Models 3D-Models for the PCB - Footprints Footprins for the PCB

A list of all the electrical components I used for the project:

- ESP32 WROOM-32E Microcontroller - SN65HVD230 CAN Transceiver - BME280 Environment temp- & humidity sensor - ADS131M08 24-bit, 8 channel ADC - HO 150-S-SP30.pdf 150A current transducer - IRFZ44N N-Channel MOSFET - LM7850 12-5V voltage regulator - AMS1117 5-3.3V voltage regulator - B57703M 10k NTC Thermistor - (ADR4533 3.3V reference voltage source)

Main components on the NMEA-2000-Battery-Power

NMEA-2000-Battery-Power bill of materials (BOM)

96 components, 42 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ADS131M08QPBSRQ1
ADS131M08
IC1
1
LM7805_TO220
U1
1
AMS1117-3.3
U2
1
STM32G431CBTX
STM32G431CBTx
U3
1
MCP2562-E-P
U4
1
BMP280
U5
1
ADR4533
U6
2
IRFZ44N
Q1, Q2
1
K7A080002020
Y1
1
X308032768KGB2SC
Y2
1
20kHz Crystal
Y3
1
CONN_01X04
Conn_01x04
J1
1
CONN_01X04
Conn_01x04
J2
1
CONN_02X08_COUNTER_CLOCKWISE
Conn_02x08_Counter_Clockwise
J3
1
CONN_01X04
Conn_01x04
J4
2
CONN_01X05
Conn_01x05
J5, J6
6
CONN_01X02
Conn_01x02
J7, J8, J9, J10, J12, J13
1
CONN_01X05
Conn_01x05
J11
1
Polyfuse
F1
2
JUMPER_2_OPEN
Jumper_2_Open
JP1, JP2
Show 22 more
QtyPartRefs
2
JUMPER_2_BRIDGED
Jumper_2_Bridged
JP6, JP7
2
SW_Push
SW1, SW2
3
1N5819
D1, D6, D7
4
LED
D2, D3, D4, D5
1
CBG322513U102T
L1
15
0.1UF
0.1uF
C1, C2, C5, C6, C9, C13, C14, C16 +7
4
20PF
20pF
C3, C7, C12, C15
2
0.33UF
0.33uF
C4, C11
5
10NF
10nF
C8, C21, C22, C24, C26
2
1UF
1uF
C10, C27
1
0.1NF
0.1nF
C18
1
220NF
220nF
C29
11
10K
10k
R1, R3, R9, R11, R13, R14, R15, R17 +3
1
0R
R2
1
1.2K
1.2k
R4
1
470R
R5
1
330R
R6
1
1K5
1k5
R7
3
120R
R8, R23, R24
1
3.3K
3.3k
R10
2
4K7
4k7
R12, R16
4
1k
R19, R20, R21, R22

NMEA-2000-Battery-Power design files

The KiCad project lives in the hoellwerth/NMEA-2000-Battery-Power repository on GitHub; these links point at the commit this page was built from.

NMEA-2000-Battery-Power: common questions

What microcontroller does the NMEA-2000-Battery-Power use?

The NMEA-2000-Battery-Power is built around the STM32G431CBTX, from the STM32 family.

How big is the NMEA-2000-Battery-Power PCB?

The NMEA-2000-Battery-Power measures 180.3 × 100.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the NMEA-2000-Battery-Power?

96 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the NMEA-2000-Battery-Power design files?

From the hoellwerth/NMEA-2000-Battery-Power repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the NMEA-2000-Battery-Power design in my own project?

The repository has no license, so all rights stay with hoellwerth. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the NMEA-2000-Battery-Power without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards