143 open source boards using the BMP280
Real designs built with the BMP280, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
LittleBrain-STM32F4-Sensorboard
pms67
55 × 55 mm82 parts4LNo license337STM32
Ventilator Main Board
RespiraWorks
350 × 155 mm646 parts4LApache-2.0168ESP32
OPEN ECU
aeonSolutions
168.9 × 123.3 mm282 parts2LCC0-1.0160RP2040/RP2350
XSense
lithiumice
30.8 × 46.9 mm74 parts4LNo license92ESP8266
Wiflier EXP
cnlohr
37.8 × 21.5 mm61 parts2LMIT92ESP32
Air quality sensor
roepkefeller
50.8 × 45 mm75 parts4LNo license59STM32
OpenDrone HW AIO FC F405
phonght32
34 × 34 mm211 parts8LMIT50NXP
Kbox hardware
sarfata
100 × 54 mm102 parts2LNo license19STM32
Hermes-FlightController
aadilnaji
51.4 × 51.4 mm64 parts4LMIT16ESP32
Drone
rmingon
117.4 × 117.4 mm49 parts2LNo license12ESP32
Dronemagnav
ajisrawi
64 × 60 mm56 parts4LCustom license11Pimoco
mlnoga
172.2 × 82.8 mm18 parts2LGPL-3.011ESP32
Hardware v2
rmingon
40 × 78 mm54 parts2LNo license10ESP8266
Flight controller v2
Eryk-Mozdzen
45 × 89 mm108 parts4LNo license9STM32
OpenEFI rev4 bkp
Churrosoft
164 × 118 mm317 parts4LCERN-OHL-S-2.08ESP8266
Core
plantbot
50 × 50 mm54 parts2LAGPL-3.08Upper board
Peize-Liu
50 × 50 mm120 parts2LNo license7ESP32
Board
dshills
120 × 80 mm17 parts2LMIT7FPVDrone
ammarjmahmood
7.5 × 10.8 mm2 parts2LNo license6Mangoh red
leoheck
70 × 61.8 mm555 parts6LMPL-2.05STM32
BareDrones-FC-V1
jpwolfe9912
37.1 × 37.2 mm127 parts6LNo license4STM32
Dreamscape-F722
sneakylizard123-4
40 × 40 mm104 parts4LNo license4ESP32
Drone swarm
ManhTi3012
98.3 × 98.3 mm83 parts2LMIT4STM32
Stm32f4xx minimal dev
amrithHN
70.8 × 70.8 mm74 parts4LGPL-3.04STM32
Controller-Drone
Himanshukohale22
59.8 × 39.6 mm43 parts2LNo license4RP2040/RP2350
Default
pete529
14.4 × 40 mm21 parts2LMIT4STM32
Zenith-Development-Board
zenitheesc
50 × 63 mm67 parts2LMIT3STM32
Dragonfly
Broccoliux
66 × 58.8 mm226 parts4LMIT2STM32
UEFI-v6.x
Churrosoft
116.5 × 98 mm193 parts4LNo license2STM32
Mini-Air
darshg321
41 × 42 mm84 parts2LCERN-OHL-W-2.02ESP32
Co2-Sensor-Hardware
twam
45 × 65 mm69 parts2LNo license2ESP32
Project Skyfall
Melih2123
55.3 × 42.3 mm51 parts4LNo license2ESP32
Long range remote lora nrf wifi bluetooth
rmingon
100 × 100 mm42 parts2LCERN-OHL-S-2.02- schematic only · 42 partsESP32
IoT-project custom-PCB
sumitisme
42 partsNo license2 - schematic only · 10 partsSTM32
Hip
8adam95
10 partsNo license2 Labio
rishabh110493
152 × 85 mm234 parts2LNo license1
How designs wire the BMP280
Read from the KiCad layouts of 114 open source designs, one per repository: what each pin of the BMP280 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 90 of 110 designs, most often 100 nF (then 1 µF).
- The VDDIO pin has a decoupling capacitor on 89 of 114 designs, most often 100 nF (then 1 µF).
- The SDI pin has a pull-up to 3.3V on 61 of 114 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The SCK pin has a pull-up to 3.3V on 60 of 114 designs, most often 4.7 kΩ (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 7 | Connected to: GND 98% | — |
| SDIpin 3 | Connected to: The microcontroller 75%, a connector 32% |
|
| SCKpin 4 | Connected to: The microcontroller 76%, a connector 32% |
|
| VDDIOpin 6 | Connected to: 3.3V 92% |
|
| VDDpin 8 | Connected to: 3.3V 95% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LittleBrain-STM32F4-Sensorboard by pms67, Ventilator Main Board by RespiraWorks, CEM by aeonSolutions and Wiflier EXP by cnlohr.
The BMP280 in open source designs
The gallery holds 143 open source boards using the BMP280 from 122 GitHub repositories; a typical one measures about 51.8 × 51.3 mm and carries around 61 components.
58% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is LittleBrain-STM32F4-Sensorboard by pms67.
Parts used alongside the BMP280
Microcontrollers on boards using the BMP280
What boards using the BMP280 are built for
BMP280: common questions
Where can I find a BMP280 reference design?
Each of the 143 boards on this page is a real design using the BMP280. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the BMP280 VDD pin?
The VDD pin has a decoupling capacitor on 90 of 110 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 114 open source designs using the BMP280.
What decoupling capacitors do designs use on the BMP280 VDDIO pin?
The VDDIO pin has a decoupling capacitor on 89 of 114 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 114 open source designs using the BMP280.
What pull-up resistor is used on the BMP280 SDI pin?
The SDI pin has a pull-up to 3.3V on 61 of 114 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 114 open source designs using the BMP280.
What parts are used alongside the BMP280?
The MPU-6050, AMS1117-3.3, USBLC6-2SC6, STM32F405RGTx and BMI088 appear in the most repositories here.
Which microcontrollers do boards using the BMP280 use?
Most are built on STM32 (53), ESP32 (42), RP2040/RP2350 (14) and ESP8266 (7).
How big is a typical board using the BMP280?
The median is 51.8 × 51.3 mm, and 58% are two-layer designs.
What is the most popular open source board using the BMP280?
By GitHub stars, LittleBrain-STM32F4-Sensorboard by pms67, with 337 stars.
Can I simulate one of these boards using the BMP280 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.