Amiga-4000d ide expansion

HoodPaul·amiga-4000d-ide-expansion

Amiga-4000d ide expansion PCB layout, top view — open source board by HoodPaul

About the Amiga-4000d ide expansion PCB

Amiga-4000d ide expansion is an open source PCB design by HoodPaul, published on GitHub. It is a 4-layer board measuring 58.4 × 55.9 mm, with 7 components from 6 distinct parts.

By type, the board carries 5 connectors and 2 diodes.

It belongs with the retro computing designs in this gallery.

From the project

Amiga 4000D IDE Expansion

A compact IDE expansion and floppy pass-through PCB for the Amiga 4000 Desktop, built to match a black PCB, white silkscreen and gold exposed-pad appearance. Current revision: 0.1.

Project collaboration: Paul of UK Computing Limited, Jon of JMC Electronics, and AI assistance through Codex.

The board provides two 40-pin IDE outputs, each intended for a master and slave device, plus a 34-pin floppy pass-through. The two motherboard sockets and both interrupt diodes fit underneath.

Amiga-4000d ide expansion, from the project README
From the project README

Amiga-4000d ide expansion bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MOTHERBOARD IDE - FIT UNDERNEATH
J1
1
IDE A - PRIMARY
J2
1
IDE B - SECONDARY
J3
1
MOTHERBOARD FLOPPY - FIT UNDERNEATH
J4
1
FLOPPY PASS-THROUGH
J5
2
1N4148
D1, D2

Amiga-4000d ide expansion design files

The KiCad project lives in the HoodPaul/amiga-4000d-ide-expansion repository on GitHub; these links point at the commit this page was built from.

Amiga-4000d ide expansion: common questions

How big is the Amiga-4000d ide expansion PCB?

The Amiga-4000d ide expansion measures 58.4 × 55.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Amiga-4000d ide expansion?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Amiga-4000d ide expansion design files?

From the HoodPaul/amiga-4000d-ide-expansion repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Amiga-4000d ide expansion design in my own project?

The repository has no license, so all rights stay with HoodPaul. Use it as a reference, and ask the author before reusing the design.

Similar boards