DB23 Universal Prototype

HoodPaul·amiga-db23-alternative·pcb/DB23_Universal_Prototype/DB23_Universal_Prototype.kicad_pcb

DB23 Universal Prototype PCB layout, top view — open source board by HoodPaul

About the DB23 Universal Prototype PCB

DB23 Universal Prototype is an open source PCB design by HoodPaul, published on GitHub. It is a 2-layer board measuring 51.2 × 9 mm, with 4 components from 4 distinct parts.

It belongs with the retro computing designs in this gallery.

From the project

Amiga DB23 Alternative

USE THE UNIVERSAL PCB AT YOUR OWN RISK. It has not been physically fitted or functionally tested on an Amiga. CAD checks and a PCB order do not establish compatibility or safe operation.

This separate board snapshot is based on PCB revision 0.5. It is intended for either a male RGB video solder-cup connector or a female external-floppy solder-cup connector, with the correct connector orientation. Both faces carry VIDEO 1 and FLOPPY 1 markers at their respective ends; other pin numbers are removed and all signal through-hole pads are round. The centre of each pin-1 label aligns with its…

DB23 Universal Prototype bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DB23M solder cups
J1
1
Pins to motherboard
J2
1
M3 mounting / shield
J3
1
DB23 shell wire bond
J4

DB23 Universal Prototype design files

The KiCad project lives in the HoodPaul/amiga-db23-alternative repository on GitHub; these links point at the commit this page was built from.

DB23 Universal Prototype: common questions

How big is the DB23 Universal Prototype PCB?

The DB23 Universal Prototype measures 51.2 × 9 mm, has 2 copper layers and is 1 mm thick.

How many components are on the DB23 Universal Prototype?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DB23 Universal Prototype design files?

From the HoodPaul/amiga-db23-alternative repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the DB23 Universal Prototype design in my own project?

The repository has no license, so all rights stay with HoodPaul. Use it as a reference, and ask the author before reusing the design.

More boards in amiga-db23-alternative

Similar boards