Bakeneko40
HorseyMask·bakeneko40·pcb/qfn/bakeneko40.kicad_pcb
About the Bakeneko40 PCB
Bakeneko40 is an open source AVR/Arduino PCB design by HorseyMask, published on GitHub under the MIT license. It is a 2-layer board measuring 266.7 × 76.2 mm, with 115 components from 19 distinct parts.
Its main chip is the ATMEGA32U2-MU, from the AVR/Arduino family. Other key parts include the SRV05-4. By type, the board carries 49 LEDs, 49 diodes, 7 capacitors, 4 resistors, 2 ICs and 1 crystal.
It belongs with the keyboards designs in this gallery.
From the project
40% verison of the bakenkeo40 keyboard by kkatano.
40% verison of the bakenkeo40 keyboard by kkatano.
PCB is still in testing and unconfirmed to work, but otherwise project is mostly done.
Case is a bit too big for plate and pcb. Either edit case or use foam between pcb and plate to allow more room for oring.
Main components on the Bakeneko40
Bakeneko40 bill of materials (BOM)
115 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA32U2-MU ATmega32U2-MU | QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U1 |
| 1 | SRV05-4 | SOT-23-6 | U2 |
| 1 | 16MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | JST SH 4-pin | JST-SR-4 | J1 |
| 1 | 500MA 500mA | Fuse_1206_3216Metric | F1 |
| 1 | SW_Push | SKQG-1155865 | SW1 |
| 37 | MX-NoLED | MXOnly-1U-NoLED | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +29 |
| 6 | MX-NoLED | MXOnly-1.25U-NoLED | MX15, MX39, MX41, MX43, MX46, MX48 |
| 2 | MX-NoLED | MXOnly-1.75U-NoLED | MX27, MX28 |
| 2 | MX-NoLED | MXOnly-1.5U-NoLED | MX42, MX47 |
| 1 | MX-NoLED | MXOnly-2.25U-ReversedStabilizers-NoLED | MX44 |
| 1 | MX-NoLED | MXOnly-2.75U-ReversedStabilizers-NoLED | MX45 |
| 49 | SOD-123 | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +41 |
| 1 | 1UF 1uF | C_0805_2012Metric | C1 |
| 3 | 0.1UF 0.1uF | C_0805_2012Metric | C2, C3, C4 |
| 1 | 10UF 10uF | C_0805_2012Metric | C5 |
| 2 | 22PF 22pF | C_0805_2012Metric | C6, C7 |
| 2 | 10K 10k | R_0805_2012Metric | R1, R4 |
| 2 | 22 | R_0805_2012Metric | R2, R3 |
Bakeneko40 design files
The KiCad project lives in the HorseyMask/bakeneko40 repository on GitHub; these links point at the commit this page was built from.
Bakeneko40: common questions
What microcontroller does the Bakeneko40 use?
The Bakeneko40 is built around the ATMEGA32U2-MU, from the AVR/Arduino family.
How big is the Bakeneko40 PCB?
The Bakeneko40 measures 266.7 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bakeneko40?
115 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bakeneko40 design files?
From the HorseyMask/bakeneko40 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Bakeneko40 design in my own project?
Yes, under the terms of its MIT license, which HorseyMask chose for the repository.
Can I test firmware for the Bakeneko40 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k