Drv8833-low voltage motor driver

hossam1238·drv8833-low-voltage-motor-driver

Drv8833-low voltage motor driver PCB layout, top view — open source board by hossam1238

About the Drv8833-low voltage motor driver PCB

Drv8833-low voltage motor driver is an open source PCB design by hossam1238, published on GitHub. It is a 2-layer board measuring 50 × 40 mm, with 15 components from 12 distinct parts.

Other key parts include the WQFN-16. By type, the board carries 4 capacitors, 3 connectors, 3 test points, 2 resistors, 1 IC and 1 transistor.

It belongs with the robotics & motion and test & measurement designs in this gallery.

From the project

KiCad PCB portfolio project: drv8833-low-voltage-motor-driver

Dual H-bridge carrier for 6–10.8 V brushed DC motors with current sense, protection and instrumentation.

This repository contains a KiCad-editable reference design intended for a junior PCB designer portfolio. It is a preliminary engineering design, not a certified or production-released product.

- Difficulty: Advanced - Revision: A - Target board: 2-layer FR-4, 1 oz copper, 50 x 40 mm target outline - Design status: schematic and PCB source included; fabrication outputs are preliminary and require a final KiCad review.

Main components on the Drv8833-low voltage motor driver

WQFN-16

Drv8833-low voltage motor driver bill of materials (BOM)

15 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
WQFN-16
U1
1
AO4407A
PowerPAK SO-8
Q1
1
2-pin 5.08mm
J1
1
4-pin 5.08mm
J2
1
1x06 2.54mm
J3
3
TH
TP1, TP2, TP3
1
SMBJ
D1
1
47uF 25V
C1
1
100NF
100nF
C2
1
10NF
10nF
C3
1
2.2UF
2.2uF
C4
2
0.1 Ohm
R1, R2

Drv8833-low voltage motor driver design files

The KiCad project lives in the hossam1238/drv8833-low-voltage-motor-driver repository on GitHub; these links point at the commit this page was built from.

Drv8833-low voltage motor driver: common questions

How big is the Drv8833-low voltage motor driver PCB?

The Drv8833-low voltage motor driver measures 50 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Drv8833-low voltage motor driver?

15 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Drv8833-low voltage motor driver design files?

From the hossam1238/drv8833-low-voltage-motor-driver repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Drv8833-low voltage motor driver design in my own project?

The repository has no license, so all rights stay with hossam1238. Use it as a reference, and ask the author before reusing the design.

Similar boards