Timer tutorial
hpvdt·timer_tutorial
About the Timer tutorial PCB
Timer tutorial is an open source PCB design by hpvdt, published on GitHub. It is a 2-layer board measuring 22.5 × 25 mm, with 8 components from 8 distinct parts.
Other key parts include the LM555xN. By type, the board carries 3 resistors, 2 capacitors, 1 IC, 1 connector and 1 diode.
It belongs with the test & measurement designs in this gallery.
From the project
Introductory project for new electronics members
This is a 555 timer based project for new electronics team members to wet their feet in the world of hardware design and prototyping, without needing to do any coding!
The goal is simple, have new members design an LED blinker using a 555-timer chip to flash at about 0.5 Hz. Ideally they start by reading and digesting the datasheet for the 555 timer (included as a PDF in this repository) and working their way to a circuit board in KiCad with some prototyping inbetween so they get experience with all stages of a circuit bring up.
Main components on the Timer tutorial
Timer tutorial bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM555xN | DIP-8_W7.62mm | U1 |
| 1 | PWR | PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | LED | LED_D4.0mm | D1 |
| 1 | 1u | CP_Radial_D4.0mm_P2.00mm | C1 |
| 1 | 10u | CP_Radial_D4.0mm_P2.00mm | C2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 144k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Timer tutorial design files
The KiCad project lives in the hpvdt/timer_tutorial repository on GitHub; these links point at the commit this page was built from.
- Layouttimer_tutoiral.kicad_pcb
- Schematictimer_tutoiral.kicad_sch
Timer tutorial: common questions
How big is the Timer tutorial PCB?
The Timer tutorial measures 22.5 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Timer tutorial?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Timer tutorial design files?
From the hpvdt/timer_tutorial repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Timer tutorial design in my own project?
The repository has no license, so all rights stay with hpvdt. Use it as a reference, and ask the author before reusing the design.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528