Kicad antigravity project
hrlpavan·kicad-antigravity-project·hardware/project.kicad_pcb
About the Kicad antigravity project PCB
Kicad antigravity project is an open source AVR/Arduino PCB design by hrlpavan, published on GitHub under the MIT license. It is a 2-layer board measuring 78 × 50 mm, with 12 components from 10 distinct parts.
Its main chip is the ATtiny85-20S, from the AVR/Arduino family. By type, the board carries 4 resistors, 3 diodes, 2 capacitors, 1 IC, 1 connector and 1 switch.
It belongs with the iot & wireless designs in this gallery.
From the project
Autonomous KiCad MCP + Google Antigravity PCB Design System (macOS + Windows Thunderbolt Bridge & Wi-Fi)
A complete, cross-platform autonomous PCB design architecture enabling AI agents (Google Antigravity, Claude, Cursor) to directly manipulate, route, inspect, and verify KiCad hardware projects over high-speed Thunderbolt 4 / USB4 bridges, local networks, or native OS runtimes.
An autonomous reference design generated and verified with this system: Board Dimensions: 70.0 mm × 50.0 mm (2-layer stackup, 1.6mm FR4) Surface Finish: ENIG (Electroless Nickel Immersion Gold) on Matte Black solder mask Branding: Micro-penetrated HRL corporate emblem with edge clearance & ground-stitching vias…

Main components on the Kicad antigravity project
Kicad antigravity project bill of materials (BOM)
12 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATtiny85-20S | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | PWR_UART | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | USER_BTN | SW_SPST_TL3342 | SW1 |
| 1 | HRL_STAT_RED | LED_0805_2012Metric | D1 |
| 1 | PWR_GOLD | LED_0805_2012Metric | D2 |
| 1 | HRL_ACT_RED | LED_0805_2012Metric | D3 |
| 1 | 100nF | C_0805_2012Metric | C1 |
| 1 | 10uF | C_0805_2012Metric | C2 |
| 1 | 10k | R_0805_2012Metric | R1 |
| 3 | 330R | R_0805_2012Metric | R2, R3, R4 |
Kicad antigravity project design files
The KiCad project lives in the hrlpavan/kicad-antigravity-project repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/project.kicad_pcb
- Schematichardware/project.kicad_sch
Kicad antigravity project: common questions
What microcontroller does the Kicad antigravity project use?
The Kicad antigravity project is built around the ATtiny85-20S, from the AVR/Arduino family.
How big is the Kicad antigravity project PCB?
The Kicad antigravity project measures 78 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad antigravity project?
12 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad antigravity project design files?
From the hrlpavan/kicad-antigravity-project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kicad antigravity project design in my own project?
Yes, under the terms of its MIT license, which hrlpavan chose for the repository.
Can I test firmware for the Kicad antigravity project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k