Max breakout
Hyiger-Designs·max_breakout
About the Max breakout
Max breakout is an open source PCB design by Hyiger-Designs, published on GitHub. It is a 4-layer board measuring 50.8 × 30 mm, with 41 components from 27 distinct parts.
Other key parts include the LP2985-5.0, LP2985-3.3, TPS2113A, MAX6816 and EPM7064STC44. By type, the board carries 16 capacitors, 9 resistors, 6 ICs, 5 connectors, 2 jumpers and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
MAX 7000S Breadboard compatible Breakout Board
Main components on the Max breakout
Max breakout bill of materials (BOM)
41 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LP2985-5.0 | SOT-23-5 | U1 |
| 1 | LP2985-3.3 | SOT-23-5 | U2 |
| 1 | TPS2113A | TSSOP-8_4.4x3mm_P0.65mm | U3 |
| 1 | MAX6816 | SOT-143 | U4 |
| 1 | EPM7064STC44 | TQFP-44_10x10mm_P0.8mm | U5 |
| 1 | TXS0108EPW | TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 1 | CTX-636 50mhz | Oscillator_SMD_TXC_7C-4Pin_5.0x3.2mm_HandSoldering | X1 |
| 1 | Left | PinHeader_1x14_P2.54mm_Vertical | J1 |
| 1 | PMOD | PinSocket_2x06_Top_Bottom_P2.54mm_Horizontal | J2 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J3 |
| 1 | Right | PinHeader_1x20_P2.54mm_Vertical | J4 |
| 1 | JTAG | PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | clk ena | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | ena | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | User | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | BLU | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 4 | 1uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C5, C6, C7 |
| 2 | 10nF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C4 |
| 7 | 100nF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8, C11, C12, C13, C14, C15, C16 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C9 |
| 1 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 2 | 100K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R5 |
| 1 | 20K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 100R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 3 | 1K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R6, R9 |
| 2 | 10K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R8 |
Max breakout design files
The KiCad project lives in the Hyiger-Designs/max_breakout repository on GitHub; these links point at the commit this page was built from.
- Layoutmax_breakout.kicad_pcb
Max breakout: common questions
How big is the Max breakout?
The Max breakout measures 50.8 × 30 mm, has 4 copper layers and is 1.6002 mm thick.
How many components are on the Max breakout?
41 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Max breakout design files?
From the Hyiger-Designs/max_breakout repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Max breakout design in my own project?
The repository has no license, so all rights stay with Hyiger-Designs. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979