HoHo

i2cjak·HoHo

HoHo PCB layout, top view — open source STM32 board by i2cjak

About the HoHo PCB

HoHo is an open source STM32 PCB design by i2cjak, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 25 × 25 mm, with 56 components from 25 distinct parts.

Its main chip is the STM32F072CB, from the STM32 family. Other key parts include the INA237, MIC5504 and AD8606. By type, the board carries 29 resistors, 9 capacitors, 5 ICs, 4 transistors, 3 connectors and 2 LEDs.

From the project

HoHo is a hard fork of Twonkie, redesigned for automated PCB assembly at JLCPCB.

HoHo is a hard fork of Twonkie, redesigned for automated PCB assembly at JLCPCB.

Twonkie successfully adapted Google's Twinkie design from BGA/six-layer construction to hand-solderable TQFP/four-layer implementation. However, hand assembly of 0402 passives and modified USB-C connectors remains time-intensive and prone to assembly defects.

HoHo addresses this by optimizing the design for JLCPCB's assembly service. All components are selected from JLCPCB's standard parts library and the layout is designed for automated pick-and-place assembly.

Main components on the HoHo

HoHo bill of materials (BOM)

56 components, 25 distinct parts.

QtyPartRefs
2
INA237
TI
U1, U2
1
MIC5504
Microchip
U3
1
STM32F072CB
STMicro
U4
1
AD8606
Analog Devices
U5
4
BSD840N
Infineon
Q1, Q2, Q3, Q4
2
USB_C_Receptacle
J1, J4
1
USB_C_Plug
P1
1
EVQ-P7M01P
Panasonic
SW1
2
CLVBA-FKA
Cree
DS1, DS2
1
BZT52C5V6
Diodes Inc.
D1
2
600@100MHz
MuRata
FB1, FB2
2
1u
Samsung Electro-Mechanics
C1, C5
2
4.7u
Samsung Electro-Mechanics
C2, C7
4
100n
Samsung Electro-Mechanics
C3, C4, C8, C9
1
10n
Samsung Electro-Mechanics
C6
6
35k7
Yageo
R1, R8, R13, R16, R21, R27
2
620
Yageo
R2, R5
4
400
Yageo
R3, R4, R6, R7
4
4k75
Yageo
R9, R17, R25, R26
2
1k
Yageo
R10, R18
Show 5 more
QtyPartRefs
2
12k1
Yageo
R11, R19
2
5k11
Yageo
R12, R20
2
200
Yageo
R14, R22
3
100
Yageo
R15, R23, R24
2
0.012
R28, R29

HoHo design files

The KiCad project lives in the i2cjak/HoHo repository on GitHub; these links point at the commit this page was built from.

HoHo: common questions

What microcontroller does the HoHo use?

The HoHo is built around the STM32F072CB, from the STM32 family.

How big is the HoHo PCB?

The HoHo measures 25 × 25 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the HoHo?

56 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the HoHo design files?

From the i2cjak/HoHo repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the HoHo design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which i2cjak chose for the repository.

Can I test firmware for the HoHo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards