4 open source boards using the INA237

Real designs built with the INA237, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The INA237 in open source designs

The gallery holds 4 open source boards using the INA237 from 3 GitHub repositories; a typical one measures about 76 × 62 mm and carries around 81 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is BMU v2 by KomplexKapharnaum.

Microcontrollers on boards using the INA237

What boards using the INA237 are built for

INA237: common questions

Where can I find a INA237 reference design?

Each of the 4 boards on this page is a real design using the INA237. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the INA237 use?

Most are built on ESP32 (2) and STM32 (1).

How big is a typical board using the INA237?

The median is 76 × 62 mm, and 0% are two-layer designs.

What is the most popular open source board using the INA237?

By GitHub stars, BMU v2 by KomplexKapharnaum, with 0 stars.

Can I simulate one of these boards using the INA237 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part