Synapse2
ibash·synapse2
About the Synapse2 PCB
Synapse2 is an open source STM32 PCB design by ibash, published on GitHub. It is a 2-layer board measuring 41.3 × 42.8 mm, with 39 components from 20 distinct parts.
Its main chip is the STM32F411CEUx, from the STM32 family. Other key parts include the NCV8177 3.3v and CAT24C512. By type, the board carries 17 capacitors, 9 resistors, 3 ICs, 3 inductors, 2 crystals and 1 switch.
Main components on the Synapse2
Synapse2 bill of materials (BOM)
39 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCV8177 3.3v | VREG_NCP170AMX300TCG | U1 |
| 1 | CAT24C512 | CAT24C512HU5IGT3 | U2 |
| 1 | STM32F411CEUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U3 |
| 1 | 24MHz 8pF 50 Ohms | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 32.768K 7p | Crystal_SMD_1210-2Pin_1.2x1.0mm | Y2 |
| 1 | SW_SPST | SW_SPST_B3U-1000P | SW1 |
| 3 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | USB1, USB2, USB3 |
| 1 | Red LED | LED_0402_1005Metric | D1 |
| 3 | 470 @ 100MHz | L_0402_1005Metric | FB1, FB2, FB3 |
| 3 | 1u | C_0402_1005Metric | C1, C2, C13 |
| 8 | 100n | C_0402_1005Metric | C3, C6, C7, C8, C9, C12, C14, C17 |
| 1 | 4u7 | C_0402_1005Metric | C4 |
| 1 | 10u | C_0603_1608Metric | C5 |
| 2 | 6p | C_0402_1005Metric | C10, C11 |
| 2 | 4p | C_0402_1005Metric | C15, C16 |
| 2 | 10k | R_0402_1005Metric | R1, R2 |
| 1 | 620 | R_0402_1005Metric | R3 |
| 2 | 2.7K | R_0402_1005Metric | R4, R5 |
| 2 | 5.1K | R_0402_1005Metric | R6, R9 |
| 2 | 200k | R_0402_1005Metric | R7, R8 |
Synapse2 design files
The KiCad project lives in the ibash/synapse2 repository on GitHub; these links point at the commit this page was built from.
- LayoutSynapse.kicad_pcb
Synapse2: common questions
What microcontroller does the Synapse2 use?
The Synapse2 is built around the STM32F411CEUx, from the STM32 family.
How big is the Synapse2 PCB?
The Synapse2 measures 41.3 × 42.8 mm, has 2 copper layers and is 1.6002 mm thick.
How many components are on the Synapse2?
39 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Synapse2 design files?
From the ibash/synapse2 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Synapse2 design in my own project?
The repository has no license, so all rights stay with ibash. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Synapse2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k