34 open source boards using the STM32F411CEUx
Real designs built with the STM32F411CEUx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mainboard
Cluradev
120 × 90 mm162 parts4LNo license118ESP32
ControlBoard
paradise-fi
76 × 76 mm207 parts4LCC-BY-NC-4.042STM32
Vert Board rev3
tokoro10g
36 × 52.5 mm115 parts4LCustom license7STM32
MITE-ESC
SySch415
40 × 50 mm70 parts4LMIT5STM32
OS-41
radio-satellites
32.5 × 61 mm66 parts4LNo license2STM32
STM32F411 USB AUDIO DAC
DeflateAwning
63.1 × 21.8 mm50 parts2LCERN-OHL-P-2.02STM32
Dumpling Main
nyuad-space
75 × 135.2 mm296 parts6LNo license1STM32
USB-TO-EtherCAT-Adapter-Board
Sudeshpandit
61 × 53 mm80 parts2LNo license1ESP8266
Rustypill
Determinant
70 × 52 mm56 parts2LNo license1STM32
ZenCore
Keyaan-07
51 × 21 mm34 parts2LMIT1STM32
Stm32-adxl345-carrier board
KrishChalana
96 × 46.5 mm20 parts2LNo license1STM32
Sigvision logic analyzer
santtos0x1
116 × 50 mm19 parts2LApache-2.01STM32
Fiddlesticks
kushurox
50 × 50 mm89 parts4LMIT0STM32
TMIT FC SMT
keeratrajsinghwork
100 × 100 mm81 parts4LNo license0STM32
USB-TO-ETHERCAT-ADAPATER-BOARD
Singanavenasahasra
63.2 × 58.9 mm80 parts2LNo license0STM32
Alacer-1
tomatencode
50 × 40 mm79 parts4LNo license0STM32
USB-to-Ethercat-Adapter-Board-
Nithish772
61.6 × 50.4 mm79 parts2LNo license0STM32
Gpsdo
AndreasArendt
70 × 70 mm71 parts4LMIT0STM32
Sky meter
cliffanet
81.9 × 48.5 mm68 parts2LNo license0STM32
Wallet mp3-player
CaptainCookie14
54 × 85 mm68 parts2LNo license0STM32
Blackmagic
aeremin
49 × 40 mm55 parts4LNo license0STM32
Vehicle movement parameters
Iverson-45
79 × 75 mm54 parts2LNo license0STM32
Radiant
VersBinarii
89 × 41.5 mm47 parts4LNo license0STM32
MC stack
keeratrajsinghwork
70 × 70 mm45 parts2LNo license0STM32
STM32-Current-Signature-Platform
mohamed-sebbar
54 × 35 mm39 parts4LCERN-OHL-W-2.00STM32
Synapse2
ibash
41.3 × 42.8 mm39 parts2LNo license0STM32
Autonomous drone
jeffmc6767
36.7 × 35.2 mm34 parts4LNo license0- schematic only · 97 partsSTM32
Autonomous Ackermann
sachu018
97 partsNo license0 STM32
Control board
EERNINUO
100 × 90 mm134 parts4LGPL-3.036STM32
Telemetry PCB V2
CohenMurray
70 × 70 mm50 parts4LNo license1STM32
Usb power meter
aeremin
37 × 44 mm42 parts4LNo license0STM32
Copycat
FE3C61AD329B
35.6 × 15.2 mm37 parts2LNo license0STM32
Hitl rack
aeremin
51 × 65 mm14 parts2LNo license0STM32
Mcustm32f411
STM32World
76.2 × 50.8 mm30 parts2LCustom license6
How designs wire the STM32F411CEUx
Read from the KiCad layouts of 31 open source designs, one per repository: what each pin of the STM32F411CEUx connects to, and the resistors, capacitors and other passives placed on it.
- The VCAP1 pin has a capacitor to GND on 28 of 31 designs, most often 2.2 µF (then 4.7 µF).
- The VDD pins have a decoupling capacitor on 28 of 31 designs, most often 100 nF (then 1 µF).
- The PH0 pin has a capacitor to GND on 26 of 31 designs, most often 12 pF (then 10 pF).
- The NRST pin has a capacitor to GND on 25 of 31 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 77% · a signal 16% |
|
| PC14pin 3 | Connected to: Signal 58% · not connected 39% |
|
| PC15pin 4 | Connected to: Signal 58% · not connected 39% |
|
| PH0pin 5 | Connected to: Signal 87% |
|
| PH1pin 6 | Connected to: Signal 87% |
|
| NRSTpin 7 | Connected to: A connector 39% |
|
| VSSApin 8 | Connected to: GND 97% | — |
| VDDApin 9 | Connected to: 3.3V 74% · a signal 26% |
|
| VCAP1pin 22 | Connected to: Signal 94% |
|
| VSSpin 23, 35, 47, 49 | Connected to: GND 97% | — |
| VDDpin 24, 36, 48 | Connected to: 3.3V 89% |
|
| PA11pin 32 | Connected to: A connector 32% |
|
| PA12pin 33 | Connected to: A connector 32% |
|
| PB6pin 42 | Connected to: A connector 26% · not connected 29% |
|
| PB7pin 43 | Connected to: A connector 26% · not connected 23% |
|
| BOOT0pin 44 | Connected to: Signal 94% |
|
| PB9pin 46 | Connected to: Not connected 61% · a signal 35% | — |
27 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mainboard by Cluradev, ControlBoard by paradise-fi, Control board by EERNINUO and Vert Board rev3 by tokoro10g.
The STM32F411CEUx in open source designs
The gallery holds 34 open source boards using the STM32F411CEUx from 32 GitHub repositories; a typical one measures about 63 × 50.8 mm and carries around 61 components.
52% use four copper layers or more, and 24% carry an open source license.
The most starred is Mainboard by Cluradev.
Parts used alongside the STM32F411CEUx
What boards using the STM32F411CEUx are built for
STM32F411CEUx: common questions
Where can I find a STM32F411CEUx reference design?
Each of the 34 boards on this page is a real design using the STM32F411CEUx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F411CEUx VCAP1 pin connected?
The VCAP1 pin has a capacitor to GND on 28 of 31 designs, most often 2.2 µF (then 4.7 µF). Counted from the KiCad layouts of 31 open source designs using the STM32F411CEUx.
What decoupling capacitors do designs use on the STM32F411CEUx VDD pin?
The VDD pins have a decoupling capacitor on 28 of 31 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 31 open source designs using the STM32F411CEUx.
How is the STM32F411CEUx PH0 pin connected?
The PH0 pin has a capacitor to GND on 26 of 31 designs, most often 12 pF (then 10 pF). Counted from the KiCad layouts of 31 open source designs using the STM32F411CEUx.
What parts are used alongside the STM32F411CEUx?
The AMS1117-3.3, USBLC6-2SC6, MPU-6050, USBLC6-2P6 and AMS1117 appear in the most repositories here.
Which microcontrollers do boards using the STM32F411CEUx use?
Most are built on STM32 (32), ESP32 (1) and ESP8266 (1).
How big is a typical board using the STM32F411CEUx?
The median is 63 × 50.8 mm, and 48% are two-layer designs.
What is the most popular open source board using the STM32F411CEUx?
By GitHub stars, Mainboard by Cluradev, with 118 stars.
Can I simulate one of these boards using the STM32F411CEUx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.