3 open source boards using the CAT24C512

Real designs built with the CAT24C512, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The CAT24C512 in open source designs

The gallery holds 3 open source boards using the CAT24C512 from 3 GitHub repositories; a typical one measures about 41.3 × 42.8 mm and carries around 79 components.

67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is 100W-Charging-PCB by Redherring32.

Microcontrollers on boards using the CAT24C512

What boards using the CAT24C512 are built for

CAT24C512: common questions

Where can I find a CAT24C512 reference design?

Each of the 3 boards on this page is a real design using the CAT24C512. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the CAT24C512 use?

Most are built on RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the CAT24C512?

The median is 41.3 × 42.8 mm, and 67% are two-layer designs.

What is the most popular open source board using the CAT24C512?

By GitHub stars, 100W-Charging-PCB by Redherring32, with 43 stars.

Can I simulate one of these boards using the CAT24C512 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part