HardLabs

Taller de control-Brischetto-Cavicchioli

Icavicchioli·Taller-de-control-Brischetto-Cavicchioli·placa bab/bab.kicad_pcb

Taller de control-Brischetto-Cavicchioli PCB layout, top view — open source AVR/Arduino board by Icavicchioli

About the Taller de control-Brischetto-Cavicchioli PCB

Taller de control-Brischetto-Cavicchioli is an open source AVR/Arduino PCB design by Icavicchioli, published on GitHub. It is a 2-layer board measuring 44.8 × 55 mm, with 10 components from 8 distinct parts.

Its main chip is the Arduino_UNO_R3, from the AVR/Arduino family. By type, the board carries 4 connectors, 2 switches, 2 resistors and 1 module.

From the project

tp1: https://www.overleaf.com/3525453746jbmzhwpqxbmw#78765e

tp1: https://www.overleaf.com/3525453746jbmzhwpqxbmw#78765e

tp2: https://www.overleaf.com/read/swpkgmxtgczf#749885

Main components on the Taller de control-Brischetto-Cavicchioli

Arduino_UNO_R3

Taller de control-Brischetto-Cavicchioli bill of materials (BOM)

10 components, 8 distinct parts.

QtyPartRefs
1
Arduino_UNO_R3
A1
1
IMU
J1
1
HC05
J2
1
motor
J3
1
Alimentacion
J4
1
R_Potentiometer
RV1
2
SW_Push
SW1, SW2
2
4K7
R1, R2

Taller de control-Brischetto-Cavicchioli design files

The KiCad project lives in the Icavicchioli/Taller-de-control-Brischetto-Cavicchioli repository on GitHub; these links point at the commit this page was built from.

Taller de control-Brischetto-Cavicchioli: common questions

What microcontroller does the Taller de control-Brischetto-Cavicchioli use?

The Taller de control-Brischetto-Cavicchioli is built around the Arduino_UNO_R3, from the AVR/Arduino family.

How big is the Taller de control-Brischetto-Cavicchioli PCB?

The Taller de control-Brischetto-Cavicchioli measures 44.8 × 55 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Taller de control-Brischetto-Cavicchioli?

10 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Taller de control-Brischetto-Cavicchioli design files?

From the Icavicchioli/Taller-de-control-Brischetto-Cavicchioli repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Taller de control-Brischetto-Cavicchioli design in my own project?

The repository has no license, so all rights stay with Icavicchioli. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Taller de control-Brischetto-Cavicchioli without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards