90 open source boards using the Arduino_UNO_R3

Real designs built with the Arduino_UNO_R3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

90 boardsClear filters|Most starred

How designs wire the Arduino_UNO_R3

Read from the KiCad layouts of 65 open source designs, one per repository: what each pin of the Arduino_UNO_R3 connects to, and the resistors, capacitors and other passives placed on it.

  • The AREF pin is left unconnected on 61 of 65 designs (a signal on 4).
  • The IOREF pin is left unconnected on 59 of 64 designs (a signal on 4).
  • The RESET pin is left unconnected on 51 of 64 designs (GND on 2, a signal on 11).
  • The +5V pin is tied to 5V on 44 of 63 designs (not connected on 9, a signal on 10).
NCpin 1Connected to: Not connected 97%
IOREFpin 2Connected to: Not connected 92%
RESETpin 3Connected to: Not connected 80% · a signal 17%
3V3pin 4Connected to: Not connected 70% · 3.3V 24%
+5Vpin 5Connected to: 5V 70% · a signal 16%
GNDpin 6, 7, 29Connected to: GND 80%
VINpin 8Connected to: Not connected 63% · 12V 25%
A3pin 12Connected to: Not connected 66% · a signal 34%
SDA/A4pin 13, 31Connected to: Not connected 65% · a signal 35%
SCL/A5pin 14, 32Connected to: Not connected 67% · a signal 33%
D0/RXpin 15Connected to: Not connected 69% · a signal 31%
D1/TXpin 16Connected to: Not connected 69% · a signal 31%
AREFpin 30Connected to: Not connected 94%

15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AC ChargingStation by PedroCNeves, PhaseLoom by AndersBNielsen, Shield kb1 by tangybbq and Rentree ARES by AresEnsea.

The Arduino_UNO_R3 in open source designs

The gallery holds 90 open source boards using the Arduino_UNO_R3 from 78 GitHub repositories; a typical one measures about 83.2 × 66.2 mm and carries around 23 components.

89% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.

The most starred is AC ChargingStation by PedroCNeves.

Microcontrollers on boards using the Arduino_UNO_R3

Arduino_UNO_R3: common questions

Where can I find a Arduino_UNO_R3 reference design?

Each of the 90 boards on this page is a real design using the Arduino_UNO_R3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the Arduino_UNO_R3 AREF pin connected?

The AREF pin is left unconnected on 61 of 65 designs (a signal on 4). Counted from the KiCad layouts of 65 open source designs using the Arduino_UNO_R3.

How is the Arduino_UNO_R3 IOREF pin connected?

The IOREF pin is left unconnected on 59 of 64 designs (a signal on 4). Counted from the KiCad layouts of 65 open source designs using the Arduino_UNO_R3.

How is the Arduino_UNO_R3 RESET pin connected?

The RESET pin is left unconnected on 51 of 64 designs (GND on 2, a signal on 11). Counted from the KiCad layouts of 65 open source designs using the Arduino_UNO_R3.

What parts are used alongside the Arduino_UNO_R3?

The 74HC595, HC-SR04, L7805, LM358 and LCD-016N002L appear in the most repositories here.

Which microcontrollers do boards using the Arduino_UNO_R3 use?

Most are built on AVR/Arduino (86), ESP32 (2), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the Arduino_UNO_R3?

The median is 83.2 × 66.2 mm, and 89% are two-layer designs.

What is the most popular open source board using the Arduino_UNO_R3?

By GitHub stars, AC ChargingStation by PedroCNeves, with 51 stars.

Can I simulate one of these boards using the Arduino_UNO_R3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part