Ttgo t7-motor driver
Idorobots·ttgo-t7-motor-driver
About the Ttgo t7-motor driver PCB
Ttgo t7-motor driver is an open source PCB design by Idorobots, published on GitHub. It is a 2-layer board measuring 33 × 39.5 mm, with 26 components from 17 distinct parts.
By type, the board carries 12 connectors, 5 diodes, 5 resistors, 2 transistors and 2 capacitors.
It belongs with the robotics & motion designs in this gallery.
From the project
TTGO T7-based DC motor driver board.
This is an interface board that adds four DC motor drivers, three servo connectors and I2C breakout to TTGO T7. You can use it to build a drone. :shrug:

Ttgo t7-motor driver bill of materials (BOM)
26 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | IRF7303 | SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2 |
| 3 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J1, J4, J7 |
| 1 | MPU | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | BAT | JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J3 |
| 1 | Power | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Left | PinHeader_2x10_P2.54mm_Vertical | J6 |
| 1 | FL | Molex_PicoBlade_53398-0271_1x02-1MP_P1.25mm_Vertical | J8 |
| 1 | FR | Molex_PicoBlade_53398-0271_1x02-1MP_P1.25mm_Vertical | J9 |
| 1 | Right | PinHeader_2x10_P2.54mm_Vertical | J10 |
| 1 | RL | Molex_PicoBlade_53398-0271_1x02-1MP_P1.25mm_Vertical | J11 |
| 1 | RR | Molex_PicoBlade_53398-0271_1x02-1MP_P1.25mm_Vertical | J12 |
| 4 | LL4148 | D_MiniMELF | D1, D2, D4, D5 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | 20uF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1 |
| 1 | 20uF | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C2 |
| 1 | 1k | R_1206_3216Metric | R1 |
| 4 | 10k | R_1206_3216Metric | R2, R3, R4, R5 |
Ttgo t7-motor driver design files
The KiCad project lives in the Idorobots/ttgo-t7-motor-driver repository on GitHub; these links point at the commit this page was built from.
Ttgo t7-motor driver: common questions
How big is the Ttgo t7-motor driver PCB?
The Ttgo t7-motor driver measures 33 × 39.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ttgo t7-motor driver?
26 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ttgo t7-motor driver design files?
From the Idorobots/ttgo-t7-motor-driver repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ttgo t7-motor driver design in my own project?
The repository has no license, so all rights stay with Idorobots. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979