Sliphub
ila-io·Sliphub·PCB/Sliphub.kicad_pcb
About the Sliphub PCB
Sliphub is an open source PCB design by ila-io, published on GitHub. It is a 2-layer board measuring 84.7 × 26.6 mm, with 20 components from 9 distinct parts.
Other key parts include the SL2.1A. By type, the board carries 7 capacitors, 6 resistors, 5 connectors, 1 IC and 1 diode.
It belongs with the usb & debug tools designs in this gallery.
From the project
A USB hub that I can slip on and off of the top of my Surface Pro!
It has 2 USB A ports and 2 USB C ports, and will fit on the top of my surface pro alongside my slipboard! I modeled this after the design I made for that, and am hoping it's the second of a suite of slip-on accessories for my laptop :D
I made it because the surface pro only has 2 USB C ports, which is basically unusable for any considerable amount of wired devices (i.e. using it in place of a desktop with monitors, input devices, etc), and I didn't have a USB hub already!

Main components on the Sliphub
Sliphub bill of materials (BOM)
20 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SL2.1A | SO16 | U1 |
| 1 | USB-C IN | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | USB-C OUT | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2, J3 |
| 2 | USB_A OUT | USB_A_Molex_67643_Horizontal | J4, J5 |
| 1 | ~ | D_SMA | D1 |
| 5 | 100nF | C_0805_2012Metric | C1, C2, C3, C4, C5 |
| 2 | 10uF | C_0805_2012Metric | C6, C7 |
| 2 | 5.1k Ω | R_0805_2012Metric | R1, R2 |
| 4 | 56kΩ | R_0805_2012Metric | R3, R4, R5, R6 |
Sliphub design files
The KiCad project lives in the ila-io/Sliphub repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Sliphub.kicad_pcb
- SchematicPCB/Sliphub.kicad_sch
- BOMBOM.csv
Sliphub: common questions
How big is the Sliphub PCB?
The Sliphub measures 84.7 × 26.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sliphub?
20 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sliphub design files?
From the ila-io/Sliphub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sliphub design in my own project?
The repository has no license, so all rights stay with ila-io. Use it as a reference, and ask the author before reusing the design.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389