FLAGS REGISTER

Iluhaprog·IN-machine·kicad-schemes/pcbs/FLAGS_REGISTER/FLAGS_REGISTER.kicad_pcb

FLAGS REGISTER PCB layout, top view — open source board by Iluhaprog

About the FLAGS REGISTER PCB

FLAGS REGISTER is an open source PCB design by Iluhaprog, published on GitHub. It is a 2-layer board measuring 70 × 65 mm, with 42 components from 11 distinct parts.

Other key parts include the SN74HC27N, SN74HC14N, SN74HC32N, SN74HC86N and SN74HC175N. By type, the board carries 22 resistors, 8 capacitors, 7 ICs, 4 LEDs and 1 connector.

From the project

Homemade computer architecture. Schemes, model and tools.

В данный момент проект на стадии разработки печатных плат и сборки физического устройства.

Сейчас уже созданы и заказанны платы для АЛУ и Регистра флагов.

В процессе создания блок пользовательских регистров и счетчики команд и микро команд.

Сейчас в планы входят: - [ ] - доработать схему управляющего устройства для работы с LCD 12864 экраном по SPI - [ ] - разработка платы расширения для того, чтобы данное вычислительно устройство могло работать с датчиками. - [ ] - изучение возможностей данного устройства и его параметров

Main components on the FLAGS REGISTER

FLAGS REGISTER bill of materials (BOM)

42 components, 11 distinct parts.

QtyPartRefs
1
SN74HC27N
U1
1
SN74HC14N
U2
2
SN74HC32N
U3, U6
1
SN74HC86N
U4
1
SN74HC175N
U5
1
SN74HC08N
U7
1
Conn_02x12_Odd_Even
J1
4
LED
NSO_1, NSO_2, NSO_3, NSO_4
7
C
C1, C2, C3, C4, C5, C6, C7
1
C
C8
22
R
R1, R2, R3, R4, R5, R6, R7, R8 +14

FLAGS REGISTER design files

The KiCad project lives in the Iluhaprog/IN-machine repository on GitHub; these links point at the commit this page was built from.

FLAGS REGISTER: common questions

How big is the FLAGS REGISTER PCB?

The FLAGS REGISTER measures 70 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FLAGS REGISTER?

42 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the FLAGS REGISTER design files?

From the Iluhaprog/IN-machine repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the FLAGS REGISTER design in my own project?

The repository has no license, so all rights stay with Iluhaprog. Use it as a reference, and ask the author before reusing the design.

More boards in IN-machine