5 open source boards using the SN74HC08N

Real designs built with the SN74HC08N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the SN74HC08N

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74HC08N connects to, and the resistors, capacitors and other passives placed on it.

  • The 2Y pin is left unconnected on 4 of 5 designs.
  • The 4Y pin is left unconnected on 4 of 5 designs.
  • The 3Y pin is left unconnected on 3 of 5 designs (a signal on 2).
  • The 2B pin has a pull-up to 5V on 2 of 5 designs, most often 3.9 kΩ (then 1 kΩ).
2Bpin 5Connected to: Signal 60% · not connected 20% · GND 20%
  • Pull-up to 5V on 40% · 3.9 kΩ (1), 1 kΩ (1)
2Ypin 6Connected to: Not connected 80% · a signal 20%
GNDpin 7Connected to: GND 100%
3Ypin 8Connected to: Not connected 60% · a signal 40%
3Bpin 10Connected to: Signal 60% · not connected 20% · GND 20%
  • Pull-up to 5V on 40% · 3.9 kΩ (1), 1 kΩ (1)
4Ypin 11Connected to: Not connected 80% · a signal 20%
VCCpin 14Connected to: 5V 100%
  • Decoupling capacitor on 40% · 100 nF (1)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vectron handheld by nickbild, FLAGS REGISTER by Iluhaprog, 6502-Retro! by linuxplayground and 4-Bit-Discrete-Transistor-Adder by PhdWizards.

The SN74HC08N in open source designs

The gallery holds 5 open source boards using the SN74HC08N from 5 GitHub repositories; a typical one measures about 166.4 × 100 mm and carries around 42 components.

60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is Vectron handheld by nickbild.

Parts used alongside the SN74HC08N

What boards using the SN74HC08N are built for

SN74HC08N: common questions

Where can I find a SN74HC08N reference design?

Each of the 5 boards on this page is a real design using the SN74HC08N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SN74HC08N 2Y pin connected?

The 2Y pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SN74HC08N.

How is the SN74HC08N 4Y pin connected?

The 4Y pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SN74HC08N.

How is the SN74HC08N 3Y pin connected?

The 3Y pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the SN74HC08N.

What parts are used alongside the SN74HC08N?

The SN74HC32N, SN74HC14N and W65C02SxP appear in the most repositories here.

How big is a typical board using the SN74HC08N?

The median is 166.4 × 100 mm, and 60% are two-layer designs.

What is the most popular open source board using the SN74HC08N?

By GitHub stars, Vectron handheld by nickbild, with 10 stars.

Can I simulate one of these boards using the SN74HC08N before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part