HardLabs

Single tube condenser dev

ImogenWren·single-tube-condenser-dev·single-tube-condensor-schematic/single-tube-condensor-schematic.kicad_pcb

Single tube condenser dev PCB layout, top view — open source Raspberry Pi board by ImogenWren

About the Single tube condenser dev PCB

Single tube condenser dev is an open source Raspberry Pi PCB design by ImogenWren, published on GitHub. It is a 2-layer board measuring 349.6 × 464.7 mm, with 65 components from 22 distinct parts.

Its main chip is the Raspberry Pi 4 Model B, from the Raspberry Pi family. Other key parts include the KSIM380D16-L-SSR, ADAM-6018+ 8TC, ADAM-6024-6AI-2AO-2DI-2DO, 5-port-network-switch and LM2596S DC-DC Module. By type, the board carries 32 connectors, 7 modules, 6 ICs, 5 relays, 5 diodes and 2 switches.

From the project

Remote Labs Single Tube Condenser Experiment

Main components on the Single tube condenser dev

KSIM380D16-L-SSRADAM-6018+ 8TCADAM-6024-6AI-2AO-2DI-2DORaspberry Pi 4 Model B5-port-network-switchLM2596S DC-DC Module

Single tube condenser dev bill of materials (BOM)

65 components, 22 distinct parts.

QtyPartRefs
6
KSIM380D16-L-SSR
U1, U2, U3, U4, U5, U6
1
ADAM-6018+ 8TC
A1
1
ADAM-6024-6AI-2AO-2DI-2DO
A2
1
Raspberry Pi 4 Model B
A3
1
5-port-network-switch
A4
3
LM2596S DC-DC Module
A5, A6, A7
1
IRF540N
Q1
31
2-way-terminal-block
J1, J2, J3, J4, J5, J6, J7, J8 +23
1
2-way-terminal-block
J20
1
CircuitBreaker_3P
CB1
4
DIN_Rail
DRA1, DRA2, DRA3, DRA4
1
240VAC_24VDC_PSU
G1
3
relay-SPDT-888-6798
K1, K2, K3
2
Finder-DPDT-relay-DIN
K4, K5
1
enable-keyswitch
SW1
1
mode-keyswitch
SW3
1
Arduino_Mega2560_Shield
XA1
1
On Air
D1
1
Solvent Mode Indicator
D2
1
H2O Mode Indicator
D3
Show 2 more
QtyPartRefs
1
Solvent Level Indicator
D4
1
H2O Level Indicator
D5

Single tube condenser dev design files

The KiCad project lives in the ImogenWren/single-tube-condenser-dev repository on GitHub; these links point at the commit this page was built from.

Single tube condenser dev: common questions

What microcontroller does the Single tube condenser dev use?

The Single tube condenser dev is built around the Raspberry Pi 4 Model B, from the Raspberry Pi family.

How big is the Single tube condenser dev PCB?

The Single tube condenser dev measures 349.6 × 464.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Single tube condenser dev?

65 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Single tube condenser dev design files?

From the ImogenWren/single-tube-condenser-dev repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Single tube condenser dev design in my own project?

The repository has no license, so all rights stay with ImogenWren. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Single tube condenser dev without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards