Mad Flashlight
Incomprehensible·Mad_Flashlight·KiCad/Flashlight.kicad_pcb
About the Mad Flashlight PCB
Mad Flashlight is an open source PIC PCB design by Incomprehensible, published on GitHub. It is a 2-layer board measuring 63.5 × 110 mm, with 66 components from 47 distinct parts.
Its main chip is the PIC16F716-ISO, from the PIC family. Other key parts include the AMS1117-5.0, LM60BIM3 and LM25085MM_NOPB. By type, the board carries 23 resistors, 17 capacitors, 6 diodes, 4 ICs, 4 transistors and 3 connectors.
It belongs with the wearables designs in this gallery.
From the project
Portable flashlight so powerful it can guide you in the dark as well as scare off the predators ☄️
Variable light intensity, changable with a knob
Top | Bottom :-------------------------:|:-------------------------: | |

Main components on the Mad Flashlight
Mad Flashlight bill of materials (BOM)
66 components, 47 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U1 |
| 1 | PIC16F716-ISO | SOIC127P1030X265-18N | U2 |
| 1 | LM60BIM3 | LM60BIM3 | U3 |
| 1 | LM25085MM_NOPB | LM25085MM&slash_NOPB | U4 |
| 1 | PMOS_Vin | YJS4407A | Q1 |
| 1 | CSD25402Q3A | TRANS_CSD25402Q3A | Q2 |
| 2 | Q_NMOS_GSD | SOT-23_Handsoldering | Q3, Q4 |
| 1 | Crystal | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | XHP90 | XHP90 | J2 |
| 1 | XT30PW-F | AMASS_XT30PW-F | J3 |
| 1 | ICSP 1x6 | B6B-EH-A | J4 |
| 1 | Fuse_PWR | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | Fuse_LED | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2 |
| 1 | HFD4-24-SR | HFD4024S | K1 |
| 1 | SS-12D06L5 | SS12D06L5 | S1 |
| 1 | SW_SPST | DSIC01LSGET | SW1 |
| 1 | SW_Push | SW_TS-1187A-B-A-B | SW2 |
| 1 | Thermistor_NTC | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | TH2 |
| 1 | D_TVS | SOT-23_Handsoldering | D1 |
| 1 | D_Schottky | D_SOD-323_HandSoldering | D2 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BLINK_TEST | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | PWR_STATUS | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | Driver_Schottky | TO-263-2 | D5 |
| 1 | D_flyback | D_SMAG | D6 |
| 1 | L | IHLP4040DZER2R2M01 | L1 |
| 3 | C | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C5 |
| 4 | C | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C7, C8, C9 |
| 1 | C_Small | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 1 | CP | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C6 |
| 2 | C_reserve | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10, C13 |
| 1 | Cff | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | Cout | CAP_10TPE47MAZB | C12 |
| 1 | Cvcc | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 2 | Cin | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C17 |
| 1 | Cadj | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C18 |
| 2 | R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R14 |
| 2 | 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3 |
| 10 | R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5, R6, R7, R8, R10, R16, R19 +2 |
| 1 | Rsns | R_1508_Wide | R9 |
| 1 | Rfb2 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11 |
| 1 | Rfb1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | Rt | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13 |
| 1 | R_cushion | TyoHM-SMF-3W | R15 |
| 1 | Rterm | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R17 |
| 1 | Rpar | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | Radj | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
| 1 | R_Variable | VZ067TL1B | R21 |
Mad Flashlight design files
The KiCad project lives in the Incomprehensible/Mad_Flashlight repository on GitHub; these links point at the commit this page was built from.
Mad Flashlight: common questions
What microcontroller does the Mad Flashlight use?
The Mad Flashlight is built around the PIC16F716-ISO, from the PIC family.
How big is the Mad Flashlight PCB?
The Mad Flashlight measures 63.5 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mad Flashlight?
66 components, from 47 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mad Flashlight design files?
From the Incomprehensible/Mad_Flashlight repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Mad Flashlight design in my own project?
The repository has no license, so all rights stay with Incomprehensible. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mad Flashlight without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379