Adaptateur
INSA-GEI·insa-gei·hardware/Adaptateur/Adaptateur.kicad_pcb
About the Adaptateur PCB
Adaptateur is an open source PCB design by INSA-GEI, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 74 × 42 mm, with 18 components from 13 distinct parts.
Other key parts include the FT231XS, XBEE-3-TH and NCP1117-3.3_SOT223. By type, the board carries 7 capacitors, 3 ICs, 3 resistors, 2 diodes, 1 connector and 1 switch.
From the project
INSA-GEI top level repository
Main components on the Adaptateur
Adaptateur bill of materials (BOM)
18 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT231XS | SSOP-20_3.9x8.7mm_P0.635mm | U1 |
| 1 | XBEE-3-TH | XBEE-3-TH | U2 |
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U3 |
| 1 | USB_B | USB_B_Lumberg_2411_02_Horizontal | J1 |
| 1 | SW_DPST_x2 | SW_PUSH_6mm_H4.3mm | SW1 |
| 2 | LED | LED_1206_3216Metric | D1, D2 |
| 1 | MI1210K600R-10 | R_2010_5025Metric | FB1 |
| 4 | 100nF | C_1206_3216Metric | C1, C4, C6, C7 |
| 1 | 10nF | C_1206_3216Metric | C2 |
| 1 | 2.2µF | CP_EIA-3528-21_Kemet-B | C3 |
| 1 | 10µF | CP_EIA-6032-28_Kemet-C | C5 |
| 2 | 1K | R_1206_3216Metric | R1, R2 |
| 1 | 10K | R_1206_3216Metric | R3 |
Adaptateur design files
The KiCad project lives in the INSA-GEI/insa-gei repository on GitHub; these links point at the commit this page was built from.
Adaptateur: common questions
How big is the Adaptateur PCB?
The Adaptateur measures 74 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adaptateur?
18 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adaptateur design files?
From the INSA-GEI/insa-gei repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Adaptateur design in my own project?
Yes, under the terms of its GPL-3.0 license, which INSA-GEI chose for the repository.
More boards in insa-gei
Multiprise pilotée
INSA-GEI
184 × 107.5 mm43 parts2LGPL-3.00Adaptateur USB XBEE 2
INSA-GEI
57.5 × 56.6 mm32 parts2LGPL-3.00Bornier Multiprise Pilotée
INSA-GEI
81 × 48.5 mm25 parts2LGPL-3.00STM32
Carte Convertion
INSA-GEI
87.9 × 27.1 mm12 parts2LGPL-3.00Adaptateur XBEE RN4871
INSA-GEI
24.4 × 27.6 mm8 parts2LGPL-3.00